# Nmap Changelog ($Id: CHANGELOG 2788 2005-07-27 04:39:55Z fyodor $) Nmap 3.83DC13 o Added the ability for Nmap to send and properly route raw ethernet packets cointaining IP datagrams rather than always sending the packets via raw sockets. This is particularly useful for Windows, since Microsoft has disabled raw socket support in XP for no good reason. Nmap tries to choose the best method at runtime based on platform, though you can override it with the new --send_eth and --send_ip options. o Added ARP ping (-PR). Nmap can now send raw ethernet ARP requests to determine whether hosts on a LAN are up, rather than relying on higher-level IP packets (which can only be sent after a successful ARP request and reply anyway). This is much faster and more reliable (not subject to IP-level firewalling) than IP-based probes. The downside is that it only works when the target machine is on the same LAN as the scanning machine. It is now used automatically for any hosts that are detected to be on a local ethernet network, unless --send_ip was specified. Example usage: nmap -sP -PR 192.168.0.0/16 . This is not yet supported on Windows. o Added the --spoof_mac option, which asks Nmap to use the given MAC address for all of the raw ethernet frames it sends. The MAC given can take several formats. If it is simply the string "0", Nmap chooses a completely random MAC for the session. If the given string is an even number of hex digits (with the pairs optionally separated by a colon), Nmap will use those as the MAC. If less than 12 hex digits are provided, Nmap fills in the remainder of the 6 bytes with random values. If the argument isn't a 0 or hex string, Nmap looks through the nmap-mac-prefixes to find a vendor name containing the given string (it is case insensitive). If a match is found, Nmap uses the vendor's OUI (3-byte prefix) and fills out the remaining 3 bytes randomly. Valid --spoof_mac argument examples are "Apple", "0", "01:02:03:04:05:06", "deadbeefcafe", "0020F2", and "Cisco". o Applied a massive OS fingerprint update from Zhao Lei (zhaolei(a)gmail.com). About 350 fingerprints were added, and many more were updated. Notable additions include Mac OS X 10.4 (Tiger), OpenBSD 3.7, FreeBSD 5.4, Windows Server 2003 SP1, Sony AIBO (along with a new "robotic pet" device type category), the latest Linux 2.6 kernels Cisco routers with IOS 12.4, a ton of VoIP devices, Tru64 UNIX 5.1B, new Fortinet firewalls, AIX 5.3, NetBSD 2.0, Nokia IPSO 3.8.X, and Solaris 10. Of course there are also tons of new broadband routers, printers, WAPs and pretty much any other device you can coax an ethernet cable (or wireless card) into! o Integrated hundreds of nmap-service-probes signatures from Doug Hoyte (doug(a)hcsw.org) o Added a distcc probes and a bunch of smtp matches from Dirk Mueller (mueller(a)kde.org) to nmap-service-probes. Also added AFS version probe and matches from Lionel Cons (lionel.cons(a)cern.ch). And even more probes and matches from Martin Macok (martin.macok(a)underground.cz) o Fixed a problem where Nmap compilation would use header files from the libpcap included with Nmap even when it was linking to a system libpcap. Thanks to Solar Designer (solar(a)openwall.com) and Okan Demirmen (okan(a)demirmen.com) for reporting the problem. o Added configure option --with-libpcap=included to tell Nmap to use the version of libpcap it ships with rather than any that may already be installed on the system. You can still use --with-libpcap=[dir] to specify that a system libpcap be installed rather than the shipped one. By default, Nmap looks at both and decides which one is likely to work best. If you are having problems on Solaris, try --with-libpcap=included . o Changed the --no-stylesheet option to --no_stylesheet to be consistant with all of the other Nmap options. Though I'm starting to like hyphens a bit better than underscores and may change all of the options to use hyphens instad at some point. o Added "Exclude" directive to nmap-service-probes grammar which causes version detection to skip listed ports. This is helpful for ports such as 9100. Some printers simply print any data sent to that port, leading to pages of HTTP requests, SMB queries, X Windows probes, etc. If you really want to scan all ports, specify --allports. This patch came from Doug Hoyte (doug(a)hcsw.org). o Added a stripped-down version of Dug Song's excellent libdnet networking library (v. 1.10). This helps with the new raw ethernet features. I made various changes, which are described in libdnet-stripped/NMAP_MODIFICATIONS o Chagned the interesting ports array from a 65K-member array of pointers into an STL list. This noticeable reduces memory usage in some cases, and should also give a slight runtime performance boost. This patch was written by Paul Tarjan (ptarjan(a)gmail.com). o Removed the BSDFIX/BSDUFIX macros. The underlying bug in FreeBSD/NetBSD is still there though. When an IP packet is sent through a raw socket, these platforms require the total length and fragmentation offset fields of an IP packet to be in host byte order rather than network byte order, even though all the other fields must be in NBO. I believe that OpenBSD fixed this a while back. Other platforms, such as Linux, Solaris, Mac OS X, and Windows take all of the fields in network byte order. While I removed the macro, I still do the munging where required so that Nmap still works on FreeBSD. o Integrated many nmap-service-probes changes from Bo Jiang (jiangbo(a)brandeis.edu) o Added some new RPC services to nmap-rpc thanks to a patch from vlad902 (vlad902(a)gmail.com). o The OS fingerprint is now provided in XML output if debugging is enabled (-d) or verbosity is at least 2 (-v -v). This patch was sent by Okan Demirmen (okan(a)demirmen.com) o Fixed the way tcp connect scan (-sT) respons to ICMP network unreachable responses (patch by Richard Moore (rich(a)westpoint.ltd.uk). o Fixed a crash problem related to non-portable varargs (vsnprintf) usage. Reports of this crash came from Alan William Somers (somers(a)its.caltech.edu) and Christophe (chris.branch(a)gmx.de). This patch was prevalent on Linux boxes running an Opteron/Athlon64 CPU in 64-bit mode. o Nmap distribution signing has changed. Release files are now signed with a new Nmap Project GPG key (KeyID 6B9355D0). Fyodor has also generated a new key for himself (KeyID 33599B5F). The Nmap key has been signed by Fyodor's new key, which has been signed by Fyodor's old key so that you know they are legit. The new keys are available at http://www.insecure.org/nmap/data/nmap_gpgkeys.txt , as docs/nmap_gpgkeys.txt in the Nmap source tarball, and on the public keyserver network. Here are the fingerprints: pub 1024D/33599B5F 2005-04-24 Key fingerprint = BB61 D057 C0D7 DCEF E730 996C 1AF6 EC50 3359 9B5F uid Fyodor sub 2048g/D3C2241C 2005-04-24 pub 1024D/6B9355D0 2005-04-24 Key fingerprint = 436D 66AB 9A79 8425 FDA0 E3F8 01AF 9F03 6B93 55D0 uid Nmap Project Signing Key (http://www.insecure.org/) sub 2048g/A50A6A94 2005-04-24 o Update random host scan (-iR) to support the latest IANA-allocated ranges, thanks to patch by Chad Loder (cloder(a)loder.us). o Added 'leet ASCII art to the confugrator! ARTIST NOTE: If you think the ASCII art sucks, feel free to send me alternatives. Note that only people compiling the UNIX source code get this. (ASCII artist unknown). o Updated GNU shtool (a helper program used during 'make install' to version 2.0.2, which fixes a predictable temporary filename weakness discovered by Eric Raymond. o Removed addport element from XML DTD, since it is no longer used (sugested by Lionel Cons (lionel.cons(a)cern.ch) o Added new --privileged command-line option and NMAP_PRIVILEGED environmental variable. Either of these tell Nmap to assume that the user has full privileges to execute raw packet scans, OS detection and the like. This can be useful when Linux kernel capabilities or other systems are used that allow non-root users to perform raw packet or ethernet frame manipulation. Without this flag or variable set, Nmap bails on UNIX if geteuid() is nonzero. o Fixed Nmap compilation on Solaris x86 thanks to a patch from Simon Burr (simes(a)bpfh.net). o ultra_scan() now sets pseudo-random ACK values (rather than 0) for any TCP scans in which the initial probe packet has the ACK flag set. This would be the ACK, Xmas, Maimon, and Window scans. o Added a bunch of RPC numbers from nmap-rpc maintainer Eilon Gishri (eilon(a)aristo.tau.ac.il) o Updated the Nmap version number, description, and similar fields that MS Visual Studio places in the binary. This was done by editing mswin32/nmap.rc as suggested by Chris Paget (chrisp@ngssoftware.com) o Fixed Nmap compilation on DragonFly BSD (and perhaps some other systems) by applying a short patch by Joerg Sonnenberger which omits the declaration of errno if it is a #define. o Fixed an integer overflow that prevented Nmap from scanning 2,147,483,648 hosts in one expression (e.g. 0.0.0.0/1). Problem noted by Justin Cranford (jcranford(a)n-able.com). While /1 scans are now possible, don't expect them to finish during your bathroom break. No matter how constipated you are. o Increased the buffer size allocated for fingerprints to prevent Nmap from running out and quitting (error message: "Assertion `servicefpalloc - servicefplen > 8' failed". Thanks to Mike Hatz (mhatz(a)blackcat.com) for the report. [ Actually this was done in a previous version, but I forgot which one ] o Changed from CVS to Subversion source control system (which rocks!). Neither repository is public (I'm paranoid because both CVS and SVN have had remotely exploitable security holes), so the main change users will see is that "Id" tags in file headers use the SVN format for version numbering and such. Nmap 3.81 o Nmap now ships with and installs (in the same directory as other data files such as nmap-os-fingerprints) an XSL stylesheet for rendering the XML output as HTML. This stylesheet was written by Benjamin Erb ( see http://www.benjamin-erb.de/nmap/ for examples). It supports tables, version detection, color-coded port states, and more. The XML output has been augmented to include an xml-stylesheet directive pointing to nmap.xsl on the local filesystem. You can point to a different XSL file by providing the filename or URL to the new --stylesheet argument. Omit the xml-stylesheet directive entirely by specifying --no-stylesheet. The XML to HTML conversion can be done with an XSLT processor such as Saxon, Sablot, or Xalan, but modern browsers can do this on the fly -- simply load the XML output file in IE or Firefox. Some features don't currently work with Firefox's on-the-fly rendering. Perhaps some Mozilla wizard can fix that in either the XSL or the browser itself. I hate having things work better in IE :). It is often more convenient to have the stylesheet loaded from a URL rather than the local filesystem, allowing the XML to be rendered on any machine regardless of whether/where the XSL is installed. For privacy reasons (avoid loading of an external URL when you view results), Nmap uses the local filesystem by default. If you would like the latest version of the stylesheet load from the web when rendering, specify --stylesheet http://www.insecure.org/nmap/data/nmap.xsl . o Fixed fragmentation option (-f). One -f now sets sends fragments with just 8 bytes after the IP header, while -ff sends 16 bytes to reduce the number of fragments needed. You can specify your own fragmentation offset (must be a multiple of 8) with the new --mtu flag. Don't also specify -f if you use --mtu. Remember that some systems (such as Linux with connection tracking) will defragment in the kernel anyway -- so test first while sniffing with ethereal. These changes are from a patch by Martin Macok (martin.macok(a)underground.cz). o Nmap now prints the number (and total bytes) of raw IP packets sent and received when it completes, if verbose mode (-v) is enabled. The report looks like: Nmap finished: 256 IP addresses (3 hosts up) scanned in 30.632 seconds Raw packets sent: 7727 (303KB) | Rcvd: 6944 (304KB) o Fixed (I hope) an error which would cause the Windows version of Nmap to abort under some circumstances with the error message "Unexpected error in NSE_TYPE_READ callback. Error code: 10053 (Unknown error)". Problem reported by "Tony Golding" (biz(a)tonygolding.com). o Added new "closed|filtered" state. This is used for Idlescan, since that scan method can't distinguish between those two states. Nmap previously just used "closed", but this is more accurate. o Null, FIN, Maimon, and Xmas scans now mark ports as "open|filtered" instead of "open" when they fail to receive any response from the target port. After all, it could just as easily be filtered as open. This is the same change that was made to UDP scan in 3.70. Also as with UDP scan, adding version detection (-sV) will change the state from open|filtered to open if it confirms that they really are open. o Fixed a bug in ACK scan that could cause Nmap to crash with the message "Unexpected port state: 6" in some cases. Thanks to Glyn Geoghegan (glyng(a)corsaire.com) for reporting the problem. o Change IP protocol scan (-sO) so that a response from the target host in any protocol at all will prove that protocol is open. As before, no response means "open|filtered", an ICMP protocol unreachable means "closed", and most other ICMP error messages mean "filtered". o Patched a Winpcap issue that prevented read timeouts from being honored on Solaris (thus slowing down Nmap substantially). The problem report and patch were sent in by Ben Harris (bjh21(a)cam.ac.uk). o Changed IP protocol scan (-sO) so that it sends valid ICMP, TCP, and UDP headers when scanning protocols 1, 6, and 17, respectively. An empty IP header is still sent for all other protocols. This should prevent the error messages such as "sendto in send_ip_packet: sendto(3, packet, 20, 0, 192.31.33.7, 16) => Operation not permitted" that Linux (and perhaps other systems) would give when they try to interpret the raw packet. This also makes it more likely that these protocols will elicit a response, proving that the protocol is "open". o The windows build now uses header and static library files from Winpcap 3.1Beta4. It also now prints out the DLL version you are using when run with -d. I would recommend upgrading to 3.1Beta4 if you have an older Winpcap installed. o Nmap now prints a warning message on Windows if Winpcap is not found (it then reverts to raw sockets mode if available, as usual). o Added an NTP probe and matches to the version detection database (nmap-service-probes) thanks to a submission from Martin Macok (martin.macok@underground.cz). o Applied several Nmap service detection database updates sent in by Martin Macok (martin.macok(a)underground.cz). o The XML nmaprun element now has a startstr attribute which gives the human readable calendar time format that a scan started. Similarly the finished element now has a timestr attribute describing when the scan finished. These are in addition to the existing nmaprun/start and finished/time attributes that provided the start and finish time in UNIX time_t notation. This should help in development of XSLT stylesheets for Nmap XML output. o Fixed a memory leak that would generally consume several hundred bytes per down host scanned. While the effect for most scans is negligible, it was overwhelming when Scott Carlson (Scott.Carlson(a)schwab.com) tried to scan 24 million IPs (10.0.0.0/8). Thanks to him for reporting the problem. Also thanks to Valgrind ( http://valgrind.kde.org ) for making it easy to debug. o Fixed a crash on Windows systems that don't include the iphlpapi DLL. This affects Win95 and perhaps other variants. Thanks to Ganga Bhavani (GBhavani(a)everdreamcorp.com) for reporting the problem and sending the patch. o Ensured that the device type, os vendor, and os family OS fingerprinting classification values are scrubbed for XML compliance in the XML output. Thanks to Matthieu Verbert (mve(a)zurich.ibm.com) for reporting the problem and sending a patch. o Rewrote the host IP (target specification) parser for easier maintenance and to fix a bug found by Netris (netris(a)ok.kz) o Changed to Nmap XML DTD to use the same xmloutputversion (1.01) as newer versions of Nmap. Thanks to Laurent Estieux (laurent.estieux(a)free.fr) for reporting the problem. o Fixed compilation on some HP-UX 11 boxes thanks to a patch by Petter Reinholdtsen (pere(a)hungry.com). o Fixed a portability problem on some OpenBSD and FreeBSD machines thanks to a patch by Okan Demirmen (okan(a)demirmen.com). o Applied Martin Macok's (martin.macok(a)underground.cz) "cosmetics patch", which fixes a few typos and minor problems. Nmap 3.75 o Implemented a huge OS fingerprint database update. The number of fingerprints increased more than 20% to 1,353 and many of the existing ones are much improved. Notable updates include the fourth edition of Bell Lab's Plan9, Grandstream's BugeTone 101 IP Phone, and Bart's Network Boot Disk 2.7 (which runs MS-DOS). Oh, and Linux kernels up to 2.6.8, dozens of new Windows fingerprints including XP SP2, the latest Longhorn warez, and many modified Xboxes, OpenBSD 3.6, NetBSD up to 2.0RC4, Apple's AirPort Express WAP and OS X 10.3.3 (Panther) release, Novell Netware 6.5, FreeBSD 5.3-BETA, a bunch of Linksys and D-Link consumer junk, the latest Cisco IOS 12.2 releases, a ton of miscellaneous broadband routers and printers, and much more. o Updated nmap-mac-prefixes with the latest OUIs from the IEEE. [ http://standards.ieee.org/regauth/oui/oui.txt ] o Updated nmap-protocols with the latest IP protocols from IANA [ http://www.iana.org/assignments/protocol-numbers ] o Added a few new Nmap version detection signatures thanks to a patch from Martin Macok (martin.macok(a)underground.cz). o Fixed a crash problem in the Windows version of Nmap, thanks to a patch from Ganga Bhavani GBhavani(a)everdreamcorp.com). o Fixed Windows service scan crashes that occur with the error message "Unexpected nsock_loop error. Error code 10022 (Unknown error)". It turns out that Windows does not allow select() calls with all three FD sets empty. Lame. The Linux select() man page even suggests calling "select with all three sets empty, n zero, and a non-null timeout as a fairly portable way to sleep with subsecond precision." Thanks to Gisle Vanem (giva(a)bgnett.no) for debugging help. o Added --max_scan_delay parameter. Nmap will sometimes increase the delay itself when it detects many dropped packets. For example, Solaris systems tend to respond with only one ICMP port unreachable packet per second during a UDP scan. So Nmap will try to detect this and lower its rate of UDP probes to one per second. This can provide more accurate results while reducing network congestion, but it can slow the scans down substantially. By default (with no -T options specified), Nmap allows this delay to grow to one second per probe. This option allows you to set a lower or higher maximum. The -T4 and -T5 scan modes now limit the maximum scan delay for TCP scans to 10 and 5 ms, respectively. o Fixed a bug that prevented RPC scan (-sR) from working for UDP ports unless service detection (-sV) was used. -sV is still usually a better approach than -sR, as the latter ONLY handles RPC. Thanks to Stephen Bishop (sbishop(a)idsec.co.uk) for reporting the problem and sending a patch. o Fixed nmap_fetchfile() to better find custom versions of data files such as nmap-services. Note that the implicitly read directory should be ~/.nmap rather than ~/nmap . So you may have to move any customized files you now have in ~/nmap . Thanks to nnposter (nnposter(a)users.sourceforge.net) for reporting the problem and sending a patch. o Changed XML output so that the MAC address [address] element comes right after the IPv4/IPv6 [address] element. Apparently this is needed to comply with the DTD ( http://www.insecure.org/nmap/data/nmap.dtd ). Thanks to Adam Morgan (adam.morgan(a)Q1Labs.com) and Florian Ebner (Florian.Ebner(a)e-bros.de) for the problem reports. o Fixed an error in the Nmap RPM spec file reported by Pascal Trouvin (pascal.trouvin(a)wanadoo.fr) o Fixed a timing problem in which a specified large --send_delay would sometimes be reduced to 1 second during a scan. Thanks to Martin Macok (martin.macok(a)underground.cz) for reporting the problem. o Fixed a timing problem with sneaky and paranoid modes (-T1 and -T0) which would cause Nmap to continually scan the same port and never hit other ports when scanning certain firewalled hosts. Thanks to Curtis Doty (Curtis(a)GreenKey.net) for reporting the problem. o Fixed a bug in the build system that caused most Nmap subdirectories to be configured twice. Changing the variable holding the name of subdirs from $subdirs to $nmap_cfg_subdirs resolved the problem -- configure must have been using that variable name for its own internal operations. Anyway, this should reduce compile time significantly. o Made a trivial change to nsock/src/nsock_event.c to work around a "a bug in GCC 3.3.1 on FreeBSD/sparc64". I found the patch by digging around the FreeBSD ports tree repository. It would be nice if the FreeBSD Nmap port maintainers would report such things to me, rather than fixing it in their own Nmap tree and then applying the patch to every future version. On the other hand, they deserve some sort of "most up-to-date" award. I stuck Nmap 3.71-PRE1 in the dist directory for a few people to test, and made no announcement or direct link. The FreeBSD crew found it and upgraded anyway :). The gcc-workaround patch was apparently submitted to the FreeBSD folks by Marius Strobl (marius(a)alchemy.franken.de). o Fixed (I hope) an OS detection timing issue which would in some cases lead to the warning that "insufficient responses for TCP sequencing (3), OS detection may be less accurate." Thanks to Adam Kerrison (adam(a)tideway.com) for reporting the problem. o Modified the warning given when files such as nmap-services exist in both the compiled in NMAPDATADIR and the current working directory. That message should now only appear once and is more clear. o Fixed ping scan subsystem to work a little bit better when --scan_delay (or some of the slower -T templates which include a scan delay) is specified. Thanks to Shahid Khan (khan(a)asia.apple.com) for suggestions. o Taught connect() scan to properly interpret ICMP protocol unreachable messages. Thanks to Alan Bishoff (abishoff(a)arc.nasa.gov) for the report. o Improved the nmapfe.desktop file to better comply with standards. Thanks to Stephane Loeuillet (stephane.loeuillet(a)tiscali.fr) for sending the patch. Nmap 3.70 o Rewrote core port scanning engine, which is now named ultra_scan(). Improved algorithms make this faster (often dramatically so) in almost all cases. Not only is it superior against single hosts, but ultra_scan() can scan many hosts (sometimes hundreds) in parallel. This offers many efficiency/speed advantages. For example, hosts often limit the ICMP port unreachable packets used by UDP scans to 1/second. That made those scans extraordinarily slow in previous versions of Nmap. But if you are scanning 100 hosts at once, suddenly you can receive 100 responses per second. Spreading the scan amongst hosts is also gentler toward the target hosts. Nmap can still scan many ports at the same time, as well. If you find cases where ultra_scan is slower or less accurate, please send a report (including exact command-lines, versions used, and output, if possible) to Fyodor. o Added --max_hostgroup option which specifies the maximum number of hosts that Nmap is allowed to scan in parallel. o Added --min_hostgroup option which specifies the minimum number of hosts that Nmap should scan in parallel (there are some exceptions where Nmap will still scan smaller groups -- see man page). Of course, Nmap will try to choose efficient values even if you don't specify hostgroup restrictions explicitly. o Rewrote TCP SYN, ACK, Window, and Connect() scans to use ultra_scan() framework, rather than the old pos_scan(). o Rewrote FIN, Xmas, NULL, Maimon, UDP, and IP Protocol scans to use ultra_scan(), rather than the old super_scan(). o Overhauled UDP scan. Ports that don't respond are now classified as "open|filtered" (open or filtered) rather than "open". The (somewhat rare) ports that actually respond with a UDP packet to the empty probe are considered open. If version detection is requested, it will be performed on open|filtered ports. Any that respond to any of the UDP probes will have their status changed to open. This avoids a the false-positive problem where filtered UDP ports appear to be open, leading to terrified newbies thinking their machine is infected by back orifice. o Nmap now estimates completion times for almost all port scan types (any that use ultra_scan()) as well as service scan (version detection). These are only shown in verbose mode (-v). On scans that take more than a minute or two, you will see occasional updates like: SYN Stealth Scan Timing: About 30.01% done; ETC: 16:04 (0:01:09 remaining) New updates are given if the estimates change significantly. o Added --exclude option, which lets you specify a comma-separated list of targets (hosts, ranges, netblocks) that should be excluded from the scan. This is useful to keep from scannig yourself, your ISP, particularly sensitive hosts, etc. The new --excludefile reads the list (newline-delimited) from a given file. All the work was done by Mark-David McLaughlin (mdmcl(a)cisco.com> and William McVey ( wam(a)cisco.com ), who sent me a well-designed and well-tested patch. o Nmap now has a "port scan ping" system. If it has received at least one response from any port on the host, but has not received responses lately (usually due to filtering), Nmap will "ping" that known-good port occasionally to detect latency, packet drop rate, etc. o Service/version detection now handles multiple hosts at once for more efficient and less-intrusive operation. o Nmap now wishes itself a happy birthday when run on September 1 in verbose mode! The first public release was on that date in 1997. o The port randomizer now has a bias toward putting commonly-accessible ports (80, 22, etc.) near the beginning of the list. Getting a response early helps Nmap calculate response times and detect packet loss, so the scan goes faster. o Host timeout system (--host_timeout) overhauled to support host parallelization. Hosts times are tracked separately, so a host that finishes a SYN scan quickly is not penalized for an exceptionally slow host being scanned at the same time. o When Nmap has not received any responses from a host, it can now use certain timing values from other hosts from the same scan group. This way Nmap doesn't have to use absolute-worst-case (300bps SLIP link to Uzbekistan) round trip timeouts and such. o Enabled MAC address reporting when using the Windows version of Nmap. Thanks to Andy Lutomirski (luto(a)stanford.edu) for writing and sending the patch. o Workaround crippled raw sockets on Microsoft Windows XP SP2 scans. I applied a patch by Andy Lutomirski (luto(a)stanford.edu) which causes Nmap to default to winpcap sends instead. The winpcap send functionality was already there for versions of Windows such as NT and Win98 that never supported Raw Sockets in the first place. o Changed how Nmap sends Arp requests on Windows to use the iphlpapi SendARP() function rather than creating it raw and reading the response from the Windows ARP cache. This works around a (reasonable) feature of Windows Firewall which ignored such unsolicited responses. The firewall is turned on by default as of Windows XP SP2. This change was implemented by Dana Epp (dana(a)vulscan.com). o Fixed some Windows portability issues discovered by Gisle Vanem (giva(a)bgnett.no). o Upgraded libpcap from version 0.7.2 to 0.8.3. This was an attempt to fix an annoying bug, which I then found was actually in my code rather than libpcap :). o Removed Ident scan (-I). It was rarely useful, and the implementation would have to be rewritten for the new ultra_scan() system. If there is significant demand, perhaps I'll put it back in sometime. o Documented the --osscan_limit option, which saves time by skipping OS detection if at least one open and one closed port are not found on the remote hosts. OS detection is much less reliable against such hosts anyway, and skipping it can save some time. o Updated nmapfe.desktop file to provide better NmapFE desktop support under Fedora Core and other systems. Thanks to Mephisto (mephisto(a)mephisto.ma.cx) for sending the patch. o Further nmapfe.desktop changes to better fit the freedesktop standard. The patch came from Murphy (m3rf(a)swimmingnoodle.com). o Fixed capitalization (with a perl script) of many over-capitalized vendor names in nmap-mac-prefixes. o Ensured that MAC address vendor names are always escaped in XML output if they contain illegal characters (particularly '&'). Thanks to Matthieu Verbert (mve(a)zurich.ibm.com) for the report and a patch. o Changed xmloutputversion in XML output from 1.0 to 1.01 to note that there was a slight change (which was actually the MAC stuff in 3.55). Thanks to Lionel CONS (lionel.cons(a)cern.ch) for the suggestion. o Many Windows portability fix and bug fixes, thanks to patch from Gisle Vanem (giva(a)bgnett.no). With these changes, he was able to compile Nmap on Windows using MingW + gcc 3.4 C++ rather than MS Visual Studio. o Removed (addport) tags from XML output. They used to provide open ports as they were discovered, but don't work now that the port scanners scan many hosts at once. They did not specify an IP address. Of course the appropriate (port) tags are still printed once scanning of a target is complete. o Configure script now detects GNU/k*BSD systems (whatever those are), thanks to patch from Robert Millan (rmh@debian.org) o Fixed various crashes and assertion failures related to the new ultra_scan() system, that were found by Arturo "Buanzo" Busleiman (buanzo(a)buanzo.com.ar), Eric (catastrophe.net), and Bill Petersen (bill.petersen(a)alcatel.com). o Fixed some minor memory leaks relating to ping and list scanning as well as the Nmap output table. These were found with valgrind ( http://valgrind.kde.org/ ). o Provide limited --packet_trace support for TCP connect() (-sT) scans. o Fixed compilation on certain Solaris machines thanks to a patch by Tom Duffy (tduffy(a)sun.com) o Fixed some warnings that crop up when compiling nbase C files with a C++ compiler. Thanks to Gisle Vanem (giva(a)bgnett.no) for sending the patch. o Tweaked the License blurb on source files and in the man page. It clarifies some issues and includes a new GPL exception that explicitly allows linking with the OpenSSL library. Some people believe that the GPL and OpenSSL licenses are incompatable without this special exception. o Fixed some serious runtime portability issues on *BSD systems. Thanks to Eric (catastrophe.net) for reporting the problem. o Changed the argument parser to better detect bogus arguments to the -iR option. o Removed a spurious warning message relating to the Windows ARP cache being empty. Patch by Gisle Vanem (giva(a)bgnett.no). o Removed some C++-style line comments (//) from nbase, because some C compilers (particularly on Solaris) barf on those. Problem reported by Raju Alluri Nmap 3.55 o Added MAC address printing. If Nmap receives packet from a target machine which is on an Ethernet segment directly connected to the scanning machine, Nmap will print out the target MAC address. Nmap also now contains a database (derived from the official IEEE version) which it uses to determine the vendor name of the target ethernet interface. The Windows version of Nmap does not yet have this capability. If any Windows developer types are interesting in adding it, you just need to implement IPisDirectlyConnected() in tcpip.cc and then please send me the patch. Here are examples from normal and XML output (angle brackets replaced with [] for HTML changelog compatibility): MAC Address: 08:00:20:8F:6B:2F (SUN Microsystems) [address addr="00:A0:CC:63:85:4B" vendor="Lite-on Communications" addrtype="mac" /] o Updated the XML DTD to support the newly printed MAC addresses. Thanks to Thorsten Holz (thorsten.holz(a)mmweg.rwth-aachen.de) for sending this patch. o Added a bunch of new and fixed service fingerprints for version detection. These are from Martin Macok (martin.macok(a)underground.cz). o Normalized many of the OS names in nmap-os-fingerprints (fixed capitalization, typos, etc.). Thanks to Royce Williams (royce(a)alaska.net) and Ping Huang (pshuang(a)alum.mit.edu) for sending patches. o Modified the mswine32/nmap_performance.reg Windows registry file to use an older and more compatible version. It also now includes the value "StrictTimeWaitSeqCheck"=dword:00000001 , as suggested by Jim Harrison (jmharr(a)microsoft.com). Without that latter value, the TcpTimedWaitDelay value apparently isn't checked. Windows users should apply the new registry changes by clicking on the .reg file. Or do it manually as described in README-WIN32. This file is also now available in the data directory at http://www.insecure.org/nmap/data/nmap_performance.reg o Applied patch from Gisle Vanem (giva(a)bgnett.no) which allows the Windows version of Nmap to work with WinPCAP 3.1BETA (and probably future releases). The Winpcap folks apparently changed the encoding of adapter names in this release. o Fixed a ping scanning bug that would cause this error message: "nmap: targets.cc:196: int hostupdate (Target **, Target *, int, int, int, timeout_info *, timeval *, timeval *, pingtune *, tcpqueryinfo *, pingstyle): Assertion `pt->down_this_block > 0' failed." Thanks to Beirne Konarski (beirne(a)neo.rr.com) for reporting the problem. o If a user attempts -PO (the letter O), print an error suggesting that they probably mean -P0 (Zero) to disable ping scanning. o Applied a couple patches (with minor changes) from Oliver Eikemeier (eikemeier(a)fillmore-labs.com) which fix an edge case relating to decoy scanning IP ranges that must be sent through different interfaces, and improves the Nmap response to certain error codes returned by the FreeBSD firewall system. The patches are from http://cvsweb.freebsd.org/ports/security/nmap/files/ . o Many people have reported this error: "checking for type of 6th argument to recvfrom()... configure: error: Cannot find type for 6th argument to recvfrom()". In most cases, the cause was a missing or broken C++ compiler. That should now be detected earlier with a clearer message. o Fixed the FTP bounce scan to better detect filtered ports on the target network. o Fixed some minor bugs related to the new MAC address printing feature. o Fixed a problem with UDP-scanning port 0, which was reported by Sebastian Wolfgarten (sebastian(a)wolfgarten.com). o Applied patch from Ruediger Rissmann (RRI(a)zurich.ibm.com), which helps Nmap understand an EACCESS error, which can happen at least during IPv6 scans from certain platforms to some firewalled targets. o Renamed ACK ping scan option from -PT to -PA in the documentation. Nmap has accepted both names for years and will continue to do so. o Removed the notice that Nmap is reading target specifications from a file or stdin when you specify the -iL option. It was sometimes printed to stdout even when you wanted to redirect XML or grepable output there, because it was printed during options processing before output files were handled. This change was suggested by Anders Thulin (ath(a)algonet.se). o Added --source_port as a longer, but hopefully easier to remember, alias for -g. In other words, it tries to use the constant source port number you specify for probes. This can help against poorly configured firewalls that trust source port 20, 53, and the like. o Removed undocumented (and useless) -N option. o Fixed a version detection crash reported in excellent detail by Jedi/Sector One (j(a)pureftpd.org). o Applied patch from Matt Selsky (selsky(a)columbia.edu) which helps Nmap build with OpenSSL. o Modified the configure/build system to fix library ordering problems that prevented Nmap from building on certain platforms. Thanks to Greg A. Woods (woods(a)weird.com) and Saravanan (saravanan_kovai(a)HotPop.com) for the suggestions. o Applied a patch to Makefile.in from Scott Mansfield (thephantom(a)mac.com) which enables the use of a DESTDIR variable to install the whole Nmap directory structure under a different root directory. The configure --prefix option would do the same thing in this case, but DESTDIR is apparently a standard that package maintainers like Scott are used to. An example usage is "make DESTDIR=/tmp/packageroot". o Removed unnecessary banner printing in the non-root connect() ping scan. Thanks to Tom Rune Flo (tom(a)x86.no) for the suggestion and a patch. o Updated the headers at the top of each source file (mostly to advance the copyright year to 2004 and note that Nmap is a registered trademark). o The SInfo line of submitted fingerprints now provides the target's OUI (first three bytes of the MAC address) if available. Example: "M=00A0CC". To save a couple bytes, the "Time" field in SInfo has been renamed to "Tm". The OUI helps identify the device vendor, and is only available when the source and target machines are on the same ethernet network. Nmap 3.50 o Integrated a ton of service fingerprints, increasing the number of signatures more than 50%. It has now exceeded 1,000 for the first time, and represents 180 unique service protocols from acap, afp, and aim to xml-rpc, zebedee, and zebra. o Implemented a huge OS fingerprint update. The number of fingerprints has increased more than 13% to 1,121. This is the first time it has exceeded 1000. Notable updates include Linux 2.6.0, Mac OS X up to 10.3.2 (Panther), OpenBSD 3.4 (normal and pf "scrub all"), FreeBSD 5.2, the latest Windows Longhorn warez, and Cisco PIX 6.3.3. As usual, there are a ton of new consumer devices from ubiquitous D-Link, Linksys, and Netgear broadband routers to a number of new IP phones including the Cisco devices commonly used by Vonage. Linksys has apparently gone special-purpose with some of their devices, such as their WGA54G "Wireless Game Adapter" and WPS54GU2 wireless print server. A cute little MP3 player called the Rio Karma was submitted multiple times and I also received and integrated fingerprints for the Handspring Treo 600 (PalmOS). o Applied some man page fixes from Eric S. Raymond (esr(a)snark.thyrsus.com). o Added version scan information to grepable output between the last two '/' delimiters (that space was previously unused). So the format is now "portnum/state/protocol/owner/servicename/rpcinfo/versioninfo" as in "53/open/tcp//domain//ISC Bind 9.2.1/" and "22/open/tcp//ssh//OpenSSH 3.5p1 (protocol 1.99)/". Thanks to MadHat (madhat(a)unspecific.com) for sending a patch (although I did it differently). Note that any '/' characters in the version (or owner) field are replaced with '|' to keep awk/cut parsing simple. The service name field has been updated so that it is the same as in normal output (except for the same sort of escaping discussed above). o Integrated an Oracle TNS service probe and match lines contributed by Frank Berger (fm.berger(a)gmx.de). New probe contributions are always appreciated! o Fixed a crash that could happen during SSL version detection due to SSL session ID cache reference counting issues. o Applied patch from Rob Foehl (rwf(a)loonybin.net) which fixes the --with_openssl=DIR configure argument. o Applied patch to nmap XML dtd (nmap.dtd) from Mario Manno (mm(a)koeln.ccc.de). This accounts for the new version scanning functionality. o Updated the Windows build system so that you don't have to manually copy nmap-service-probes to the output directory. I also updated the README-WIN32 to elaborate further on the build process. o Added configure option --with-libpcre=included which causes Nmap to build with its included version of libpcre even if an acceptable version is available on the system. o Upgraded to Autoconf 2.59 (from 2.57). This should help HP-UX compilation problems reported by Petter Reinholdtsen (pere(a)hungry.com) and may have other benefits as well. o Applied patch from Przemek Galczewski (sako(a)avet.com.pl) which adds spaces to the XML output in places that apparently help certain older XML parsers. o Made Ident-scan (-I) limits on the length and type of responses stricter so that rogue servers can't flood your screen with 1024 characters. The new length limit is 32. Thanks to Tom Rune Flo (tom(a)x86.no) for the suggestion and a patch. o Fingerprints for unrecognized services can now be a bit longer to avoid truncating as much useful response information. While the fingerprints can be longer now, I hope they will be less frequent because of all the newly recognized services in this version. o The nmap-service-probes "match" directive can now take a service name like "ssl/vmware-auth". The service will then be reported as vmware-auth (or whatever follows "ssl/") tunneled by SSL, yet Nmap won't actually bother initiating an SSL connection. This is useful for SSL services which can be fully recognized without the overhead of making an SSL connection. o Version scan now chops commas and whitespace from the end of vendorproductname, version, and info fields. This makes it easier to write templates incorporating lists. For example, the tcpmux service (TCP port 1) gives a list of supported services separated by CRLF. Nmap uses this new feature to print them comma separated without having an annoying trailing comma as so (linewrapped): match tcpmux m|^(sgi_[-.\w]+\r\n([-.\w]+\r\n)*)$| v/SGI IRIX tcpmux//Available services: $SUBST(1, "\r\n", ",")/ Nmap 3.48 o Integrated an enormous number of version detection service submissions. The database has almost doubled in size to 663 signatures representing the following 130 services: 3dm-http afp apcnisd arkstats bittorent chargen citrix-ica cvspserver cvsup dantzretrospect daytime dict directconnect domain echo eggdrop exec finger flexlm font-service ftp ftp-proxy gnats gnutella-http hddtemp hp-gsg http http-proxy hylafax icecast ident imap imaps imsp ipp irc ircbot irc-proxy issrealsecure jabber kazaa-http kerberos-sec landesk-rc ldap linuxconf lmtp lotusnotes lpd lucent-fwadm meetingmaker melange microsoft-ds microsoft-rdp mldonkey msactivesync msdtc msrpc ms-sql-m mstask mud mysql napster ncacn_http ncp netbios-ns netbios-ssn netrek netsaint netstat netwareip networkaudio nntp nsclient nsunicast ntop-http omniback oracle-mts oracle-tns pcanywheredata pksd pmud pop2 pop3 pop3s poppass postgresql powerchute printer qotd redcarpet rendezvous rlogind rpc rsync rtsp sdmsvc sftp shell shivahose sieve slimp3 smtp smux snpp sourceoffice spamd ssc-agent ssh ssl svrloc symantec-av symantec-esm systat telnet time tinyfw upnp uucp veritasnetbackup vnc vnc-http vtun webster whois wins winshell wms X11 xfce zebra o Added the ability to execute "helper functions" in version templates, to help clean up/manipulate data captured from a server response. The first defined function is P() which includes only printable characters in a captured string. The main impetus for this is to deal with Unicode strings like "W\0O\0R\0K\0G\0R\0O\0U\0P\0" that many MS protocols send. Nmap can now decode that into "WORKGROUP". o Added SUBST() helper function, which replaces strings in matched appname/version/extrainfo strings with something else. For example, VanDyke Vshell gives a banner that includes "SSH-2\.0-VShell_2_2_0_528". A substring match is used to pick out the string "2_2_0_528", and then SUB21ST(1,"_",".") is called on that match to form the version number 2.2.0.528. o If responses to a probe fail to match any of the registered match strings for that probe, Nmap will now try against the registered "null probe" match strings. This helps in the case that the NULL probe initially times out (perhaps because of initial DNS lookup) but the banner appears in later responses. o Applied some portability fixes (particularly for OpenBSD) from Chad Loder (cloder(a)loder.us), who is also now the OpenBSD Nmap port maintainer. o Applied some portability fixes from Marius Strobl (marius(a)alchemy.franken.de). o The tarball distribution of Nmap now strips the binary at install time thanks to a patch from Marius Strobl (marius(a)alchemy.franken.de). o Fixed a problem related to building Nmap on systems that lack PCRE libs (and thus have to use the ones included by Nmap). Thanks to Remi Denis-Courmont (deniscr6(a)cti.ecp.fr) for the report and patch. o Alphabetized the service names in each Probe section in nmap-service-probes (makes them easier to find and add to). o Fixed the problem several people reported where Nmap would quit with a "broken pipe" error during service scanning. Thanks to Jari Ruusu (jari.ruusu(a)pp.inet.fi) for sending a patch. The actual error message was "Unexpected error in NSE_TYPE_READ callback. Error code: 32 (Broken pipe)" o Fixed protocol scan (-sO), which I had broken when adding the new output table format. It would complain "NmapOutputTable.cc:128: failed assertion `row < numRows'". Thanks to Matt Burnett (marukka(a)mac.com) for notifying me of the problem. o Upgraded Libpcap to the latest tcpdump.org version (0.7.2) from 0.7.1 o Applied a patch from Peter Marschall (peter(a)adpm.de) which adds version detection support to nmapfe. o Fixed a problem with XML output being invalid when service detection was done on SSL-tunneled ports. Thanks to the several people who reported this - it means that folks are actually using the XML output :). o Fixed (I hope) some Solaris Sun ONE compiler compilation problems reported (w/patches) by Mikael Mannstrom (candyman(a)penti.org) o Fixed the --with-openssl configure option for people who have OpenSSL installed in a path not automatically found by their compilers. Thanks to Marius Strobl (marius(a)alchemy.franken.de) for the patch. o Made some portability changes for HP-UX and possibly other types of machines, thanks to a patch from Petter Reinholdtsen (pere(a)hungry.com) o Applied a patch from Matt Selsky (selsky(a)columbia.edu) which fixes compilation on some Solaris boxes, and maybe others. The error said "cannot compute sizeof (char)" o Applied some patches from the NetBSD ports tree that Hubert Feyrer (hubert.feyrer(a)informatik.fh-regensburg.de) sent me. The NetBSD Nmap ports page is at http://www.NetBSD.org/packages/net/nmap/ . o Applied some Makefile patches from the FreeBSD ports tree that I found at http://www.freebsd.org/cgi/cvsweb.cgi/ports/security/nmap/files/ Nmap 3.45 o Integrated more service signatures from MadHat (madhat(a)unspecific.com), Brian Hatch (bri(a)ifokr.org), Niels Heinen (zillion(a)safemode.org), Solar Designer (solar(a)openwall.com), Seth Master (smaster(a)stanford.edu), and Curt Wilson (netw3_security(a)hushmail.com). We now have 378 signatures recognizing 86 unique service protocols. o Added new HTTPOptions and RTSPRequest probes suggested by MadHat (madhat(a)unspecific.com) o Changed the .spec file to compile Nmap RPMs without SSL support to improve compatibility (Some users might not have OpenSSL, and even those who do might not have the right version (libopenssl.so.2 vs libopenssl.so.4, etc). o Applied a patch from Solar Eclipse (solareclipse(a)phreedom.org) which increases the allowed size of the 'extrainfo' version field from 80 characters to 128. The main benefit is to allow longer apache module version strings. o Fixed Windows compilation and improved the Windows port slightly (no more macro to redefine read(). o Applied some updates to README-WIN32 sent in by Kirby Kuehl (kkuehl(a)cisco.com). He improved the list of suggested registry changes and also fixed a typo or two. He also attached a .reg file automate the Nmap connect() scan performance enhancing registry changes. I am now including that with the Nmap Windows binary .zip distribution (and in mswin32/ of the source distro). o Applied a one-line patch from Dmitry V. Levin (ldv(a)altlinux.org) which fixes a test Nmap does during compilation to see if an existing libpcap installation is recent enough. Nmap 3.40PVT17 o Wrote and posted a new paper on version scanning to http://www.insecure.org/nmap/versionscan.html . Updated nmap-service-probes and the Nmap man page to simply refer to this URL. o Integrated more service signatures from my own scanning as well as contributions from Brian Hatch (bri(a)ifokr.org), MadHat (madhat(a)unspecific.com), Max Vision (vision(a)whitehats.com), HD Moore (hdm(a)digitaloffense.net), Seth Master (smaster(a)stanford.edu), and Niels Heinen (zillion(a)safemode.org). MadHat also contributed a new probe for Windows Media Service. Many people set a LOT of signatures, which has allowed nmap-service-probes to grow from 295 to 356 signatures representing 85 service protocols! o Applied a patch (with slight changes) from Brian Hatch (bri(a)ifokr.org) which enables caching of SSL sessions so that negotiation doesn't have to be repeated when Nmap reconnects to the same between probes. o Applied a patch from Brian Hatch (bri(a)ifokr.org) which optimizes the requested SSL ciphers for speed rather than security. The list was based on empirical evidence from substantial benchmarking he did with tests that resemble nmap-service-scanning. o Updated the Nmap man page to discuss the new version scanning options (-sV, -A). o I now include nmap-version/aclocal.m4 in the distribution as this is required to rebuild the configure script ( thanks to Dmitry V. Levin (ldv(a)altlinux.org) for notifying me of the problem. o Applied a patch from Dmitry V. Levin (ldv(a)altlinux.org) which detects whether the PCRE include file is or and Ryan Lowe (rlowe(a)pablowe.net) for giving me access to Mac OS X boxes. o Stripped down libpcre build system to remove libtool dependency and other cruft that Nmap doesn't need. (this was mostly a response to libtool-related issues on Mac OS X). o Added a new --version_trace option which causes Nmap to print out extensive debugging info about what version scanning is doing (this is a subset of what you would get with --packet_trace). You should usually use this in combination with at least one -d option. o Fixed a port number printing bug that would cause Nmap service fingerprints to give a negative port number when the actual port was above 32K. Thanks to Seth Master (smaster(a)stanford.edu) for finding this. o Updated all the header text again to clarify our interpretation of "derived works" after some suggestions from Brian Hatch (bri(a)ifokr.org) o Updated the Nsock config.sub/config.guess to the same newer versions that Nmap uses (for Mac OS X compilation). Nmap 3.40PVT16 o Fixed a compilation problem on systems w/o OpenSSL that was discovered by Solar Designer. I also fixed some compilation problems on non-IPv6 systems. It now compiles and runs on my Solaris and ancient OpenBSD systems. o Integrated more services thanks to submissions from Niels Heinen (zillion(a)safemode.org). o Canonicalized the headers at the top of each Nmap/Nsock header source file. This included clarifying our interpretation of derived works, updating the copyright date to 2003, making the header a bit wider, and a few other light changes. I've been putting this off for a while, because it required editing about a hundred !#$# files! Nmap 3.40PVT15 o Fixed a major bug in the Nsock time caching system. This could cause service detection to inexplicably fail against certain ports in the second or later machines scanned. Thanks to Solar Designer and HD Moore for helping me track this down. o Fixed some *BSD compilation bugs found by Zillion (zillion(a)safemode.org). o Integrated more services thanks to submissions from Fyodor Yarochkin (fygrave(a)tigerteam.net), and Niels Heinen (zillion(a)safemode.org), and some of my own exploring. There are now 295 signatures. o Fixed a compilation bug found by Solar Designer on machines that don't have struct sockaddr_storage. Nsock now just uses "struct sockaddr *" like connect() does. o Fixed a bug found by Solar Designer which would cause the Nmap portscan table to be truncated in -oN output files if the results are very long. o Changed a bunch of large stack arrays (e.g. int portlookup[65536]) into dynamically allocated heap pointers. The large stack variables apparently caused problems on some architectures. This issue was reported by osamah abuoun (osamah_abuoun(a)hotmail.com). Nmap 3.40PVT14 o Added IPv6 support for service scan. o Added an 'sslports' directive to nmap-service-probes. This tells Nmap which service checks to try first for SSL-wrapped ports. The syntax is the same as the normal 'ports' directive for non-ssl ports. For example, the HTTP probe has an 'sslports 443' line and SMTP-detecting probes have and 'sslports 465' line. o Integrated more services thanks to submissions from MadHat (madhat(a)unspecific.com), Solar Designer (solar(a)openwall.com), Dug Song (dugsong(a)monkey.org), pope(a)undersec.com, and Brian Hatch (bri(a)ifokr.org). There are now 288 signatures, matching these 65 service protocols: chargen cvspserver daytime domain echo exec finger font-service ftp ftp-proxy http http-proxy hylafax ident ident imap imaps ipp ircbot ircd irc-proxy issrealsecure landesk-rc ldap meetingmaker microsoft-ds msrpc mud mysql ncacn_http ncp netbios-ns netbios-ssn netsaint netwareip nntp nsclient oracle-tns pcanywheredata pop3 pop3s postgres printer qotd redcarpet rlogind rpc rsync rtsp shell smtp snpp spamd ssc-agent ssh ssl telnet time upnp uucp vnc vnc-http webster whois winshell X11 o Added a Lotus Notes probe from Fyodor Yarochkin (fygrave(a)tigerteam.net). o Dug Song wins the "award" for most obscure service fingerprint submission. Nmap now detects Dave Curry's Webster dictionary server from 1986 :). o Service fingerprints now include a 'T=SSL' attribute when SSL tunneling was used. o More portability enhancements thanks to Solar Designer and his Linux 2.0 libc5 boxes. o Applied a patch from Gisle Vanem (giva(a)bgnett.no) which improves Windows emulation of the UNIX mmap() and munmap() memory mapping calls. Nmap 3.40PVT13 o Added SSL-scan-through support. If service detection finds a port to be SSL, it will transparently connect to the port using OpenSSL and use version detection to determine what service lies beneath. This feature is only enabled if OpenSSL is available at build time. A new --with-openssl=DIR configure option is available if OpenSSL is not in your default compiler paths. You can use --without-openssl to disable this functionality. Thanks to Brian Hatch (bri(a)ifokr.org) for sample code and other assistance. Make sure you use a version without known exploitable overflows. In particular, versions up to and including OpenSSL 0.9.6d and 0.9.7-beta2 contained serious vulnerabilities described at http://www.openssl.org/news/secadv_20020730.txt . Note that these vulnerabilities are well over a year old at the time of this writing. o Integrated many more services thanks to submissions from Brian Hatch, HellNBack ( hellnbak(a)nmrc.org ), MadHat, Solar Designer, Simple Nomad, and Shawn Wallis (swallis(a)ku.edu). The number of signatures has grown from 242 to 271. Thanks! o Integrated Novell Netware NCP and MS Terminal Server probes from Simple Nomad (thegnome(a)nmrc.org). o Fixed a segfault found by Solar Designer that could occur when scanning certain "evil" services. o Fixed a problem reported by Solar Designer and MadHat ( madhat(a)unspecific.com ) where Nmap would bail when certain Apache version/info responses were particularly long. It could happen in other cases as well. Now Nmap just prints a warning. o Fixed some portability issues reported by Solar Designer ( solar(a)openwall.com ) Nmap 3.40PVT12 o I added probes for SSL (session startup request) and microsoft-ds (SMB Negotiate Protocol request). o I changed the default read timeout for a service probe from 7.5s to 5s. o Fixed a one-character bug that broke many scans when -sV was NOT given. Thanks to Blue Boar (BlueBoar(a)thievco.com) for the report. Nmap 3.40PVT11 o Integrated many more services thanks to submissions from Simple Nomad, Solar Designer, jerickson(a)inphonic.com, Curt Wilson, and Marco Ivaldi. Thanks! The match line count has risen from 201 to 242. o Implemented a service classification scheme to separate the vendor/product name from the version number and any extra info that is provided. Instead of v/[big version string]/, the new match lines include v/[vendor/productname]/[version]/[extrainfo]/ . See the docs at the top of nmap-service-probes for more info. This doesn't change the normal output (which lumps them together anyway), but they are separate in the XML so that higher-level programs can easily match against just a product name. Here are a few examples of the improved service element: o I went through nmap-service-probes and added the vendor name to more entries. I also added the service name where the product name itself didn't make that completely obvious. o SCO Corporation of Lindon, Utah (formerly Caldera) has lately taken to an extortion campaign of demanding license fees from Linux users for code that they themselves knowingly distributed under the terms of the GNU GPL. They have also refused to accept the GPL, claiming that some preposterous theory of theirs makes it invalid. Meanwhile they have distributed GPL-licensed Nmap in (at least) their "Supplemental Open Source CD". In response to these blatant violations, and in accordance with section 4 of the GPL, we hereby terminate SCO's rights to redistribute any versions of Nmap in any of their products, including (without limitation) OpenLinux, Skunkware, OpenServer, and UNIXWare. Nmap 3.40PVT10 o Added "soft matches". These are similar to normal match lines in that they provide a regex for recognizing a service (but no version). But instead of stopping at softmatch service recognition, the scan continues looking for more info. It only launches probes that are known-capable of matching the softmatched service. If no version number is found, at least the determined service is printed. A service print for submission is also provided in that case. So this provides more informative results and improves efficiency. o Cleaned up the Windows support a bit and did more testing and fixing. Windows service detection seems to be working fine for me now, although my testing is still pretty limited. This release includes a Windows binary distribution and the README-WIN32 has been updated to reflect new compilation instructions. o More service fingerprints! Thanks to Solar Designer, Max Vision, Frank Denis (Jedi/Sector One) for the submissions. I also added a bunch from my own testing. The number of match lines went from 179 to 201. o Updated XML output to handle new version and service detection information. Here are a few examples of the new output: o Fixed issue where Nmap would quit when ECONNREFUSED was returned when we try to read from an already-connected TCP socket. FreeBSD does this for some reason instead of giving ECONNRESET. Thanks to Will Saxon (WillS(a)housing.ufl.edu) for the report. o Removed the SERVICEMATCH_STATIC match type from nmap-service-probes. There wasn't much benefit of this over regular expressions, so it isn't worth maintaining the extra code. Nmap 3.40PVT9 o Added/fixed numerous service fingerprints thanks to submissions from Max Vision, MadHat, Seth Master. Match lines went from 164 to 179. o The Winpcap libraries used in the Windows build process have been upgraded to version 3.0. o Most of the Windows port is complete. It compiles and service scan works (I didn't test very deeply) on my WinXP box with VS.Net 2003. I try to work out remaining kinks and do some cleanup for the next version. The Windows code was restructured and improved quite a bit, but much more work remains to be done in that area. I'll probably do a Windows binary .zip release of the next version. o Various minor fixes Nmap 3.40PVT8 o Service scan is now OFF by default. You can activate it with -sV. Or use the snazzy new -A (for "All recommended features" or "Aggressive") option which turns on both OS detection and service detection. o Fixed compilation on my ancient OpenBSD 2.3 machine (a Pentium 60 :) o Added/fixed numerous service fingerprints thanks to submissions from Brian Hatch, HD Moore, Anand R., and some of my own testing. The number of match lines in this version grows from 137 to 164! Please keep 'em coming! o Various important and not-so-important fixes for bugs I encountered while test scanning. o The RPC grinder no longer prints a startup message if it has no RPC-detected ports to scan. o Some of the service fingerprint length limitations are relaxed a bit if you enable debugging (-d). Nmap 3.40PVT7 o Added a whole bunch of services submitted by Brian Hatch (bri(a)ifokr.org). I also added a few Windows-related probes. Nmap-service-probes has gone from 101 match strings to 137. Please keep the submissions coming. o The question mark now only appears for ports in the OPEN state and when service detection was requested. o I now print a separator bar between service fingerprints when Nmap prints more than one for a given host so that users understand to submit them individually (suggested by Brian Hatch (bri(a)ifokr.org)) o Fixed a bug that would cause Nmap to print "empty" service fingerprints consisting of just a semi-colon. Thanks to Brian Hatch (bri(a)ifokr.org) for reporting this. Nmap 3.40PVT6 o Banner-scanned hundreds of thousands of machines for ports 21,23,25,110,3306 to collect default banners. Where the banner made the service name/version obvious, I integrated them into nmap-service-probes. This increased the number of 'match' lines from 27 to more than 100. o Created the service fingerprint submission page at http://www.insecure.org/cgi-bin/servicefp-submit.cgi o Changed the service fingerprint format slightly for easier processing by scripts. o Applied a large portability patch from Albert Chin-A-Young (china(a)thewrittenword.com). This cleans up a number of things, particularly for IRIX, Tru64, and Solaris. o Applied NmapFE patch from Peter Marschall (peter(a)adpm.de) which "makes sure changes in the relay host and scanned port entry fields are displayed immediately, and also keeps the fields editable after de- and reactivating them." Nmap 3.40PVT4 o Limited the size of service fingerprints to roughly 1024 bytes. This was suggested by Niels Heinen (niels(a)heinen.ws), because the previous limit was excessive. The number of fingerprints printed is also now limited to 10. o Fixed a segmentation fault that could occur when ping-scanning large networks. o Fixed service scan to gracefully handle host_timeout occurrences when they happen during a service scan. o Fixed a service_scan bug that would cause an error when hosts send data and then close() during the NULL probe (when we haven't sent anything). o Applied a patch from Solar Designer (solar(a)openwall.com) which corrects some errors in the Russian man page translation and also a couple typos in the regular man page. Then I spell-checked the man page to reduce future instances of foreigners sending in diffs to correct my English :). Nmap 3.40PVT3 o Nmap now prints a "service fingerprint" for services that it is unable to match despite returning data. The web submission page it references is not yet available. o Service detection now does RPC grinding on ports it detects to be running RPC. o Fixed a bug that would cause Nmap to quit with an Nsock error when --host_timeout was used (or when -T5 was used, which sets it implicitly). o Fixed a bug that would cause Nmap to fail to print the OS fingerprint in certain cases. Thanks to Ste Jones (root(a)networkpenetration.com) for the problem report. Nmap 3.40PVT2 o Nmap now has a simple VERSION detection scheme. The 'match' lines in nmap-service-probes can specify a template version string (referencing subexpression matches from the regex in a Perl-like manner) so that the version is determined at the same time as the service. This handles many common services in a highly efficient manner. A more complex form of version detection (that initiates further communication w/the target service) may be necessary eventually to handle services that aren't as forthcoming with version details. o The Nmap port state table now wastes less whitespace due to using a new and stingy NmapOutputTable class. This makes it easier to read, and also leaves more room for version info and possibly other enhancements. o Added 's' option to match lines in nmap-service-probes. Just as with the Perl 's' option, this one causes '.' in the regular expression to match any character INCLUDING newline. o The WinPcap header timestamp is no longer used on Windows as it sometimes can be a couple seconds different than gettimeofday() (which is really _ftime() on Windows) for some reason. Thanks to Scott Egbert (scott.egbert(a)citigroup.com) for the report. o Applied a patch by Matt Selsky (selsky(a)columbia.edu) which fixes configure.in in such a way that the annoying header file "present but cannot be compiled" warning for Solaris. o Applied another patch from Matt that (we hope) fixes the "present but cannot be compiled" warning -- this time for Mac OS X. o Port table header names are now capitalized ("SERVICE", "PORT", etc) Nmap 3.40PVT1 o Initial implementation of service detection. Nmap will now probe ports to determine what is listening, rather than guessing based on the nmap-services table lookup. This can be very useful for services on unidentified ports and for UDP services where it is not always clear (without these probes) whether the port is really open or just firewalled. It is also handy for when services are run on the well-known-port of another protocol -- this is happening more and more as users try to circumvent increasingly strict firewall policies. o Nmap now uses the excellent libpcre (Perl Compatible Regular Expressions) library from http://www.pcre.org/ . Many systems already have this, otherwise Nmap will use the copy it now includes. If your libpcre is hidden away in some nonstandard place, give ./configure the new --with-libpcre=DIR directive. o Nmap now uses the C++ Standard Template Library (STL). This makes programming easier, but if it causes major portability or bloat problems, I'll reluctantly remove it. o Applied a patch from Javier Kohen (jkohen(a)coresecurity.com) which normalizes the names of many Microsoft entries in the nmap-os-fingerprints file. o Applied a patch by Florin Andrei (florin(a)sgi.com) to the Nmap RPM spec file. This uses the 'Epoch' flag to prevent the Redhat Network tool from marking my RPMs as "obsolete" and "upgrading" to earlier Redhat-built versions. A compilation flag problem is also fixed. Nmap 3.30 o Implemented the largest-ever OS fingerprint update! Roughly 300 fingerprints were added/modified. These massive changes span the gamut from AIX 5.1 to the ZyXEL Prestige broadband router line. Notable updates include OpenBSD 3.3, FreeBSD 5.1, Mac OS X 10.2.6, Windows 2003 server, and more WAPs and broadband routers than you can shake a stick at. Someone even submitted a fingerprint for Debian Linux running on the Microsoft Xbox. You have to love that irony :). Thanks to everyone who submitted fingerprints using the URL Nmap gives you when it gets a clean reading but is stumped. The fingerprint DB now contains almost 1000 fingerprints. o Went through every one of the fingerprints to normalize the descriptions a bit. I also looked up what all of the devices are (thanks E*Bay and Google!). Results like "Nexland ISB Pro800 Turbo" and "Siemens 300E Release 6.5" are much more useful when you add the words "cable modem" and "business phone system" o Added a new classification system to nmap-os-fingerprints. In addition to the standard text description, each entry is now classified by vendor name (e.g. Sun), underlying OS (e.g. Solaris), OS generation (e.g. 7), and device type ("general purpose", router, switch, game console, etc). This can be useful if you want to (say) locate and eliminate the SCO systems on a network, or find the wireless access points (WAPs) by scanning from the wired side. o Classification system described above is now used to print out a "device type" line and OS categories for matches. The free-form English details are still printed as well. Nmap can sometimes provide classifications even where it used to provide nothing because of "too many matches". These have been added to XML output as well. They are not printed for the "grepable output", as I consider that format deprecated. o Nmap will now sometimes guess in the "no exact matches" case, even if you don't use the secret --osscan_guess or -fuzzy options. o Applied another huge NmapFE patch from Peter Marschall (peter(a)adpm.de). This revamps the interface to use a tabbed format that allows for many more Nmap options to be used. It also cleans up some crufty parts of the code. Let me and Peter know what you think (and if you encounter any problems). o Windows and Amiga ports now use packet receive times from libpcap. Let me know if you get any "time computation problem" errors. o Updated version of the Russian man page translation from Alex Volkov (alex(a)cherepovets-city.ru). Nmap 3.28 o Fixed (I hope) an issue that would cause Nmap to print "Serious time computation problem in adjust_timeout ..." and quit. The ultimate cause was demonstrated by this --packet_trace snippet that Russel Miller (rmiller(a)duskglow.com) sent me: SENT (0.0500s) ICMP 0.0.0.0 > 127.0.0.1 Echo request (type=8/code=0) ... RCVD (0.0450s) ICMP 127.0.0.1 > 127.0.0.1 Echo reply (type=0/code=0) ... As you can see, the ping reply appears to come BEFORE the request was sent(!). This sort of thing happens on at least Linux and Windows. The send time is obtained from gettimeofday(timeval, NULL), while receive time libpcap packet header. If anyone knows why this occurs, or (even better) knows a good way to fix it, let me know. For now, I am allowing the response to come up to .05s "before" the request. That is gross. o For years, Nmap has added -I/usr/local/include and -L/usr/local/lib to the compiler line to grab local libraries. I have removed this behavior by default, and added a '--with-localdirs' configure option that adds it back. If Nmap fails to compile now without the above option, please let me know. I can change the default back if this change causes more problems than it solves. People (such as certain ports tree packagers) who know they don't want /usr/local should specify --without-localdirs rather than relying on that always being the default. o Fixed (I hope) a problem that led to the error message "Assertion `tqi->sockets[probe_port_num][seq] == -1' failed". o Fixed a problem that would cause Nmap on Windows to send ICMP ping packets from 0.0.0.0 instead of the appropriate source IP. Thanks to Yeti (boxed(a)blueyonder.co.uk) for the report. o Applied some changes from Solar Designer (solar(a)openwall.com) which fix some typos and also suggest safer /tmp/ behavior in the HACKING file and Lithuanian man page. These changes are for the Nmap package of his Openwall GNU/*/Linux (Owl) distribution. [ http://www.openwall.com/Owl/ ] o For Solaris, I now define NET_SIZE_T to size_t rather than socklen_t in nmap.h. Isn't that exciting?!!! Hopefully this will help compilation on Solaris 2.6 (and perhaps earlier). If any Solaris users notice new compilation problems, please let me know. Thanks to Al Smith (Al.Smith(a)aeschi.ch.eu.org) for reporting the issue. o Removed an errant getopt() prototype in nbase/getopt.h which should hopefully improve compilation on certain Solaris boxes and BSD variants. o SCO operating systems are no longer supported due to their recent (and absurd) attacks against Linux and IBM. Bug reports relating to UnixWare will be ignored, or possibly even laughed at derisively. Note that I have no reason to believe anyone has ever used Nmap on SCO systems. UnixWare and OpenServer suck. o Fixed a problem with small --max_parallelism values when non-root ping scanning that would cause Nmap to say "sendconnecttcpquery: Could not scavenge a free socket!" and quit. Problem was reported by Justin A (justin(a)bouncybouncy.net) as Debian Bug #195463. o Applied (with a few modifications) a large NmapFE patch from Peter Marschall (peter(a)adpm.de). This patch adds a bunch more scan/ping options and cleans up some redundant NmapFE code. o Included new Russian man page translation by Alex Volkov (alex(a)cherepovets-city.ru) o Changed many single-quotes (') into double quotes (") in the man page due to a disagreement over whether to represent them as (') or (\') in nroff. o Included --packet_trace support for Explicit Congestion Notification (RFC 2481/3168) flags thanks to a patch sent in by Maik Pfeil (root(a)bundesspionageministerium.de) o Included --packet_trace support for a few (unusual) ICMP types in case Nmap receives them. The patch was also sent by Maik Pfeil. o Fixed a problem with redirecting XML/Grep/Machine output to stdout on Windows (e.g. -oX - ). Problem was reported by Wei Jiang (Wei.Jiang(a)bindview.com) o Made "-g -Wall" compiler flags dependent on availability of gcc/g++ sine some other compilers do not support them. o I spam-protected the email addresses in this file. I fervently hope that within 5 years we will be able to defeat this scourge through technology and laws, so that we may again list our email addresses openly without fear of abuse by criminal spammers. Oh, and it would be a shame if the spiders went through this whole page and only found uce@ftc.gov, rhundt@fcc.gov, jquello@fcc.gov, sness@fcc.gov, president@whitehouse.gov, haesslich@loyalty.org, and rchong@fcc.gov. Nmap 3.27 o Nmap now compiles under Amiga thanks to patches sent by Diego Casorran (dcr8520(a)amiga.org). o Fixed a backwards WIN32 ifdef that broke UDP and small-fragment scans for some operating systems other than Linux and Windows. Thanks to Guido van Rooij (guido(a)gvr.org) for reporting the problem and sending a patch. o Applied patch from Marius Strobl (marius(a)alchemy.franken.de) which improves the definition of NET_SIZE_T on FreeBSD so that it compiles on 64-bit platforms. Nmap 3.26 o Fixed Mac OS X Compilation (at least on most of the machines tested). You will probably need to type "./configure CPP=/usr/bin/cpp" instead of simply "./configure". If you still have trouble, drop me an email. Thanks to everyone who provided or offered shell accounts! o Fixed a segmentation fault several people reported that was introduced in 3.25. This problem manifests itself intermittently in many normal situations involving large-network scanning. So all 3.25 users are urged to upgrade. Pre-3.25 users should upgrade too, since 3.25 included so many improvements :). Nmap 3.25 o I added UDP-based "ping" scanning. The -PU option can take an optional portlist like the TCP "ping" options (-PS, -PA), but it sends a UDP packet to the targets and expects hosts that are up to reply with a port unreachable (or possibly a UDP response if the port is open). This one is likely to work best against closed ports, since many open ports don't respond to empty requests. o Fixed (I hope) problem where Nmap would abort, complaining that "Assertion `pt->down_this_block > 0' failed". Thanks to ray(a)24hoursecurity.org and mugz(a)x-mafia.com for reporting and helping me debug this problem. o Fixed a GCC dependency reported by Ayamura Kikuchi (ayamura(a)keio.net) o Fixed an "assertion failure" which would cause Nmap to exit when you specify a --max_rtt_timeout below 3000. Thanks to Tammy Rathbun (rathbun2(a)llnl.gov) and Jan Roger Wilkens (jrw(a)proseq.net) for reporting this. o Packet receive times are now obtained from libpcap rather than simply using the time the packets are passed to Nmap. This should improve performance slightly. I was not able to get this to work properly on Windows (either pcap or raw) -- join the nmap-dev list if you have ideas. o Fixed bug that caused Nmap to ignore certain RST responses when you do both -PS and -PA. o Modified ping scan to work better when many instances of Nmap are executed concurrently. o I'm now linking directly to the gzip compressed version of Nmap on the homepage as well as the .bz2. o Fixed a portability problem that caused BSD Make to bail out. o Fixed a divide by zero error caused when non-root users (on UNIX) explicitly request ICMP pings (which require root privileges). Now it prints a warning and uses the normal non-root TCP connect() ping. Jaroslav Sladek (jup(a)matfyz.cz) found the bug and provided the patch. o Made Nmap more tolerant of corrupt nmap-services and nmap-protocols files thanks to report & patch sent by Phix (phix(a)hush.com) o Added some more port numbers sent in by Seth Master (smaster(a)stanford.edu). He has been a frequent nmap-services contributor in the last couple months. o Added --packet_trace support to Windows o Removed superfluous "addport" line in the XML output (patch from Max Schubert (nmap(a)webwizarddesign.com)). o Merged wintcpip.cc into tcpip.cc to avoid the headache of maintaining many nearly-identical functions. o Fixed an assertion failure crash related to combining port 0 scans and OS scan. Thanks to A.Jones(a)mvv.de for reporting this. o Fixed some compilation problems on systems without IPv6 support -- patch sent by Jochen Erwied (Jochen.Erwied(a)mbs-software.info) o Applied patch from Jochen Erwied (Jochen.Erwied(a)mbs-software.info) which fixes the format strings used for printing certain timestamps. o Upgraded to autoconf 2.57, including the latest config.guess/config.sub o Renamed configure.ac files to configure.in as recommended by the latest autoconf documentation. o Changed the wording of NmapFE Gnome entries to better-comply with Gnome's Human Interface Guidelines (HIG). Suggested by Axel Krauth (krauth(a)fmi.uni-passau.de) Nmap 3.20 o The random IP input option (-iR) now takes an argument specifying how many IPs you want to scan (e.g. -iR 1000). Specify 0 for the old never-ending scan behavior. o Fixed a tricky memory leak discovered by Mugz (mugz(a)x-mafia.com). o Fixed output truncation problem noted by Lionel CONS (lionel.cons(a)cern.ch) o Fixed a bug that would cause certain incoming ICMP error messages to be improperly ignored. Nmap 3.15BETA3 o Made numerous improvements to the timing behavior of "-T Aggressive" (same as -T4) scans. It is now recommended for regular use by impatient people with a fast connection. "-T Insane" mode has also been updated, but we only recommend that for, well, insane people. o Made substantial changes to the SYN/connect()/Window scanning algorithms for improved speeds, especially against heavily filtered hosts. If you notice any timing problems (misidentified ports, etc.), please send me the details (including full Nmap output and a description of what is wrong). Reports of any timing problems with -T4 would be helpful as well. o Changed Nmap such that ALL syn scan packets are sent from the port you specify with -g. Retransmissions used to utilize successively higher ports. This change has a downside in that some operating systems (such as Linux) often won't reply to the retransmissions because they reuse the same connection specifier quad (srcip:srcport:dstip:dstport). Overall I think this is a win. o Added timestamps to "Starting nmap" line and each host port scan in verbose (-v) mode. These are in ISO 8601 standard format because unlike President Bush, we actually care about International consensus :). o Nmap now comes by default in .tar.bz2 format, which compresses about 20% further. You can still find .tgz in the dist directory at http://download.insecure.org/nmap/dist/?M=D . o Various other minor bug fixes, new services, fingerprints, etc. Nmap 3.15BETA2 o I added support for a brand new "port" that many of you may have never scanned before! UDP & TCP "port 0" (and IP protocol 0) are now permitted if you specify 0 explicitly. An argument like "-p -40" would still scan ports 1-40. Unlike ports, protocol 0 IS now scanned by default. This now works for ping probes too (e.g., -PS, -PA). o Applied patch by Martin Kluge (martin(a)elxsi.info) which adds --ttl option, which sets the outgoing IPv4 TTL field in packets sent via all raw scan types (including ping scans and OS detection). The patch "should work" on Windows, but hasn't been tested. A TTL of 0 is supported, and even tends to work on a LAN: 14:17:19.474293 192.168.0.42.60214 > 192.168.0.40.135: S 326:326(0) [ttl 0] 14:17:19.474456 192.168.0.40.135 > 192.168.0.42.60214: S 280:280(0) ack 326 (ttl 128) o Applied patch by Gabriel L. Somlo ( somlo(a)acns.colostate.edu ) which extends the multi-ping-port functionality to nonroot and IPv6 connect() users. o I added a new --datadir command line option which allows you to specify the highest priority directory for Nmap data files nmap-services, nmap-os-fingerprints, and nmap-rpc. Any files which aren't in the given dir, will be searched for in the $NMAPDIR environmental variable, ~/nmap/, a compiled in data directory (e.g. /usr/share/nmap), and finally the current directory. o Fixed Windows (VC++ 6) compilation, thanks to patches from Kevin Davis (computerguy(a)cfl.rr.com) and Andy Lutomirski (luto(a)stanford.edu) o Included new Latvian man page translation by "miscelerious options" (misc(a)inbox.lv) o Fixed Solaris compilation when Sun make is used rather than GNU make. Thanks to Tom Duffy (tduffy(a)sun.com) for assistance. o Applied patch from Stephen Bishop (sbishop(a)idsec.co.uk) which prevents certain false-positive responses when Nmap raw TCP ping scans are being run in parallel. o To emphasize the highly professional nature of Nmap, I changed all instances of "fucked up" in error message text into "b0rked". o Fixed a problem with nmap-frontend RPMs that would cause a bogus /bin/xnmap link to be created (it should only create /usr/bin/xnmap). Thanks to Juho Schultz (juho.schultz(a)astro.helsinki.fi) for reporting the problem. o I made the maximum number of allowed routes and interfaces allowed on the scanning machine dynamic rather than hardcoded #defines of 1024 and 128. You never know -- some wacko probably has that many :). Nmap 3.15BETA1 o Integrated the largest OS fingerprint DB updates ever! Thanks to everyone who contributed signatures! New or substantially modified fingerprints included the latest Windows 2K/XP changes, Cisco IOS 12.2-based routers and PIX 6.3 firewalls, FreeBSD 5.0, AIX 5.1, OpenBSD 3.2, Tru64 5.1A, IBM OS/400 V5R1M0, dozens of wireless APs, VOIP devices, firewalls, printers, print servers, cable modems, webcams, etc. We've even got some mod-chipped Xbox fingerprints now! o Applied NetBSD portability patch by Darren Reed (darrenr(a)reed.wattle.id.au) o Updated Makefile to better-detect if it can't make nmapfe and provide a clearer error message. Also fixed a couple compiler warnings on some *BSD platforms. o Applied patch from "Max" (nmap(a)webwizarddesign.com) which adds the port owner to the "addport" XML output lines which are printed (only in verbose mode, I think) as each open port is discovered. o I killed the annoying whitespace that is normally appended after the service name. Now it is only there when an owner was found via -sI (in which case there is a fourth column and so "service" must be exactly 24 characters). Nmap 3.10ALPHA9 o Reworked the "ping scan" algorithm (used for any scan except -P0 or -sL) to be more robust in the face of low-bandwidth and congested connections. This also improves reliability in the multi-port and multi-type ping cases described below. o "Ping types" are no longer exclusive -- you can now do combinations such as "-PS22,53,80 -PT113 -PN -PE" in order to increase your odds of passing through strict filters. The "PB" flag is now deprecated since you can achieve the same result via "PE" and "PT" options. o Applied patch (with modest changes) by Gabriel L. Somlo (somlo(a)acns.colostate.edu), which allows multiple TCP probe ports in raw (root) mode. See the previous item for an example. o Fixed a libpcap compilation issue noted by Josef 'Jupp' Schugt (deusxmachina(a)webmail.co.za) which relates to the definition (or lack thereof) of ARPHRD_HDLC (used for Cisco HDLC frames). o Tweaked the version number (-V) output slightly. Nmap 3.10ALPHA7 o Upgraded libpcap from version 0.6.2 to 0.7.1. Updated the libpcap-possiblymodified/NMAP_MODIFICATIONS file to give a much more extensive list (including diffs) of the changes included in the Nmap bundled version of Libpcap. o Applied patch to fix a libpcap alignment bug found by Tom Duffy (tduffy(a)sun.com). o Fixed Windows compilation. o Applied patch by Chad Loder (cloder(a)loder.us) of Rapid7 which fixes OpenBSD compilation. I believe Chad is now the official OpenBSD Nmap "port" maintainer. His patch also adjusted random-scan (-iR) to include the recently allocated 82.0.0.0/8 space. o Fixed (I hope) a few compilation problems on non-IPv6-enabled machines which were noted by Josef 'Jupp' Schugt (jupp(a)gmx.de) o Included some man page translations which were inadvertently missed in previous tarballs. o Applied patch from Matthieu Verbert (mve(a)zurich.ibm.com) which places the Nmap man pages under ${prefix}/share/man rather than ${prefix}/man when installed via RPM. Maybe the tarball install should do this too? Opinions? o Applied patch from R Anderson (listbox(a)pole-position.org) which improves the way ICMP port unreachables from intermediate hosts are handled during UDP scans. o Added note to man page related to Nmap US export control. I believe Nmap falls under ECCN 5D992, which has no special restrictions beyond the standard export denial to a handful of rogue nations such as Iraq and North Korea. o Added a warning that some hosts may be skipped and/or repeated when someone tries to --resume a --randomize_hosts scan. This was suggested by Crayden Mantelium (crayden(a)sensewave.com) o Fixed a minor memory leak noted by Michael Davis (mike(a)datanerds.net). Nmap 3.10ALPHA4 o Applied patch by Max Schubert (nmap(a)webwizarddesign.com) which adds an add-port XML tag whenever a new port is found open when Nmap is running in verbose mode. The new tag looks like: [addport state="open" portid="22" protocol="tcp"/] I also updated docs/nmap.dtd to recognize this new tag. o Added German translation of Nmap man page by Marc Ruef (marc.ruef(a)computec.ch). It is also available at http://www.insecure.org/nmap/data/nmap_manpage-de.html o Includes a brand new French translation of the man page by Sebastien Blanchet. You could probably guess that it is available at http://www.insecure.org/nmap/data/nmap_manpage-fr.html o Applied some patches from Chad Loder (cloder(a)loder.us) which update the random IP allocation pool and improve OpenBSD support. Some were from the OBSD Nmap patchlist. o Fixed a compile problem on machines without PF_INET6. Thanks to Josef 'Jupp' Schugt (deusxmachina(a)webmail.co.za) for noting this. Nmap 3.10ALPHA3 o Added --min_parallelism option, which makes scans more aggressive and MUCH faster in certain situations -- especially against firewalled hosts. It is basically the opposite of --max_parallelism (-M). Note that reliability can be lost if you push it too far. o Added --packet_trace option, which tells Nmap to display all of the packets it sends and receives in a format similar to tcpdump. I mostly added this for debugging purposes, but people wishing to learn how Nmap works or for experts wanting to ensure Nmap is doing exactly what they expect. If you want this feature supported under Windows, please send me a patch :). o Fixed a segmentation fault in Idlescan (-sI). o Made Idlescan timing more conservative when -P0 is specified to improve accuracy. o Fixed an infinite-loop condition that could occur during certain dropped-packet scenarios in an Idle scan. o Nmap now reports execution times to millisecond precision (rather than rounding to the nearest second). o Fixed an infinite loop caused by invalid port arguments. Problem noted by fejed (fejed(a)uddf.net). Nmap 3.10ALPHA2 o Fixed compilation and IPv6 support on FreeBSD (tested on 4.6-STABLE). Thanks to Niels Heinen (niels.heinen(a)ubizen.com) for suggestions. o Made some portability changes based on suggestions by Josef 'Jupp' Schugt (jupp(a)gmx.de) o Fixed compilation and IPv6 support on Solaris 9 (haven't tested earlier versions). Nmap 3.10ALPHA1 o IPv6 is now supported for TCP scan (-sT), connect()-style ping scan (-sP), and list scan (-sL)! Just specify the -6 option and the IPv6 numbers or DNS names. Netmask notation is not currently supported -- I'm not sure how useful it is for IPv6, where even petty end users may be allocated trillions of addresses (/80). If you need one of the scan types that hasn't been ported yet, give Sebastien Peterson's patch a try at http://nmap6.sourceforge.net/ . If there is demand, I may integrate more of that into Nmap. o Major code restructuring, which included conversion to C++ -- so you'll need g++ or another C++ compiler. I accidentally let a C++ requirement slip in a while back and found that almost everyone has such a compiler. Windows (VC++) users: see the README-WIN32 for new compilation instructions. o Applied patch from Axel Nennker (Axel.Nennker(a)t-systems.com) which adds a --without-nmapfe option to the configure script. This is useful if your system doesn't have the proper libraries (e.g. GTK) or if you think GUIs are for sissies :). o Removed arbitrary max_parallelism (-M) limitations, as suggested by William McVey ( wam(a)cisco.com ). o Added DEC OSF to the platforms that require the BSDFIX() macro due to taking IP length and offset fields in host rather than network byte order. Suggested by Dean Bennett (deanb(a)gbtn.net) o Fixed an debug statement C ambiguity discovered by Kronos (kronos(a)kronoz.cjb.net) Nmap 3.00 o Woohoo! :) Nmap 2.99RC2 o Fixed an important memory initialization bug which was causing crashes on Mac OS X (and possibly other platforms). The problem was located by Pieter ten Pierick (P.tenPierick(a)chello.nl) o Various minor bugfixes/cleanup Nmap 2.99RC1 o Implemented the biggest OS fingerprint update since December 1999! More than 200 fingerprints were added/modified. This includes OpenBSD 3.1, Solaris 9, Mac OS 10.1.5, OS/400, FreeBSD 4.6, The latest MS WinXP changes, new CISCO equiptment, and loads of network devices such as VoIP phones, switches, printers, WAPs, etc. o Updated build system to work on MacOS X. o I removed "credit" lines from the nmap-os-fingerprints file out of concern that evil spammers might harvest the 602 addresses. Plus those took up 28K and the size of nmap-os-fingerprints has already caused trouble for some handheld devices. If anyone actually cares about the "fame" of being listed, let me know and I'll put you back in. I still appreciate everyone who submits fingerprints! I just don't want you to be spammed when the fingerprint file goes online. o Minor usage screen (nmap -h) fix suggested by Martin Kluge ( martin(a)elxsi.info ) o Insured that the initial pound (#) in C preprocessor directives is always in column 1 (portability fix). Problem noted by Shamsher Sran (ssran(a)bechtel.com) Nmap 2.54BETA37 o Made SYN scan the default for privileged (root) users. This offers far better performance for Windows users due to their broken connect() call, and is usually even preferred on UNIX because it is more stealthy and less likely to crash applications listening on the target host. o Fixed a problem noted by Ping Huang (pshuang(a)alum.mit.edu) relating to -PI scans of a machine's own non-localhost interfaces (eg scanning your ethernet address). o Applied patch from Patrice Goetghebeur (pgoetghebeur(a)mac.com) which fixes PPP/SLIP support on Mac OS X. o Applied dozens of nmap-services portnumber mapping updates researched and sent by palante(a)subterrain.net o Updated nmap-rpc to the latest version from Eilon Gishri (eilon(a)aristo.tau.ac.il) o Fixed --resume option to better detect all of the previously scanned hosts in an -oN file (bug report from Adam.Scott(a)predictive.com ) o Adjusted random IP generator (for -iR) to account for newly allocated ip space from http://www.iana.org/assignments/ipv4-address-space as noted by Chad Loder (cloder(a)acm.org) o Updated config.sub and config.guess to the versions in automake-1.6.2 . o Applied patch from Markus A. Nonym (g17m0(a)lycos.com) which checks for a recent version of GTK+ in ./configure before even trying to build NmapFE (avoids the previous ugly compiler errors). o Applied patch from benkj(a)gmx.it which fixes misbehavior when Nmap would receive EOF (including ^D) in interactive mode. o Fixed format string bugs (not the security-related kind) found by Takehiro YONEKURA (yonekura(a)obliguard.com) and Kuk-hyeon Lee (errai(a)inzen.com) o Applied patch from Greg Steuck (greg-nmap-dev(a)nest.cx) which fixes an alignment problem in charpool.c that could cause bus errors on 64-bit platforms. o Applied portability fix patch from Matt Christian (mattc(a)visi.com) Nmap 2.54BETA36 o Fixed major connect scan problem introduced in BETA35 o Changed NmapFE to use the version number 2.54BETA36 rather than 0.2.54BETA36. I had to do this because RedHat took the liberty of releasing a so-called "2.54BETA31" version of nmap-frontend in their 7.3 distribution. Thus my upgrades were failing to install on such systems because a "later" version is already installed. Nmap 2.54BETA35 o Fixed an issue that could cause the abort message "Serious time computation problem in adjust_timeout ...". If you still see this, please let me know. o Fixed Windows compilation (and I really mean it this time -- tested myself). o Applied configure script patch to recognize Solaris 2.10 when it eventually becomes available (from James Carlson (james.d.carlson(a)east.sun.com) o Applied some portability fixes from Albert Chin (china(a)thewrittenword.com) o Applied libpcap aclocal.m4 patch to enable debugging (-g) when compiling libpcap with gcc. Patch from Ping Huang (pshuang(a)alum.mit.edu) o Restructured "TCP probe port" output message a bit as suggested by Ping Huang (pshuang(a)alum.mit.edu) Nmap 2.54BETA34 o Windows compilation fixed thanks to new VC++ project file (nmap.dsp) sent by Evan Sparks (gmplague(a)sdf.lonestar.org) (I had forgotten to include the new main.c). o Various nmap-services updates o Fixed a bunch of typos and capitalization issues in nmap-os-fingerprints by applying patch sent in by Royce Williams (royce(a)alaska.net). Nmap 2.54BETA33 o Tons of OS fingerprint updates. More than 100 fingerprints added or changed, including OpenBSD 3, FreeBSD 4.5, Solaris 9 pre-release, Commodor 64 (with the TFE Ethernet Card and uIP stack), Compaq iPAQ, Cisco IOS 12.2(8), AIX 5.1, IRIX 6.5.15, various Redback/Racal/Juniper/BigIP/HP/Siemens/Brocade/Quantum devices, numerous printers/switches, KRONOS network clock, WTI Network Power Switch, Windows XP, and many more. Thanks to everyone who contributed! o Applied fix for an important RPC scanning bug sent in by Pasi Eronen (pasi.eronen(a)nixu.com) o Applied fix for nasty OS fingerprinting bug found by William Robertson (wkr(a)cs.ucsb.edu) o Do not show uptime when obviously spoofed (eg OpenBSD 3.0) o Slightly changed (I hope improved) the whitespace in Nmap output so that messages relating to the same host are kept together (and different hosts different separated by newlines). o Moved main() function into a new file, cleverly named main.c. Nmap 2.54BETA32 o Applied Windows pinging fix and from Andy Lutomirski (Luto(a)myrealbox.com) o Applied a few more Windows fixes from Andy. o Fixed a flaw in several error-checking statements noted by Giacomo Cariello (jwk(a)bug.it) o Applied Win32 compilation fixes sent by Kirby Kuehl (kkuehl(a)cisco.com) and jens.vogt(a)bluewin.ch Nmap 2.54BETA31 o Added ICMP Timestamp and Netmask ping types (-PP and -PM). These (especially timestamp) can be useful against some hosts that do not respond to normal ping (-PI) packets. o Documented the --data_length option and made it work with all the ICMP ping types (echo request, netmask, and timestamp). o Added check for strings.h before including it in portlist.c . This fixes a compilation problem on some versions of Windows. Problem first noted by Michael Vorin (mvorin(a)hotmail.com) o Applied patch from Andy Lutomirski (Luto(a)myrealbox.com) which fixes a crash on some Windows platforms when timeouts occur. o Fixed "grepable output" (-oG) so that it prints IPID sequence class rather than printing the TCP ISN sequence index twice. Problem noted by Russell Fulton (r.fulton(a)auckland.ac.nz) o Added mysterious, undocumented --scanflags option. o Applied patch from Andy Lutomirski (Luto(a)myrealbox.com) which fixes some important Windows bugs. Apparently this can cause a dramatic speedup in some circumstances. The patch had other misc. changes too. o Fix bug noted by Chris V (iselldrugstokidsonline(a)yahoo.com) in which Nmap could segmentation fault with the (bogus) command: './nmap -sO -p 1-65535 hostname' (protocol only can go up to 255). That being said, Nmap should never segfault just because of bogus options. o Fixed problem noted by Maximiliano (emax25(a)arnet.com.ar) where Nmap would get stuck in a (nearly) infinite loop when you try to "resume" a random host (-iR) scan. o Included a number of fingerprint updates, but I still have many more web submissions to go through. Also made some nmap-services portlist updates. o Included a bunch of fixes (mostly to prevent compiler warnings) from William McVey (wam(a)cisco.com) Nmap 2.54BETA30 o Added a Document Type Definition (DTD) for the Nmap XML output format (-oX) to the docs directory. This allows validating parsers to check nmap XML output files for correctness. It is also useful for application programmers to understand the XML output structure. The DTD was written by William McVey (wam(a)cisco.com) of Cisco Secure Consulting Services ( http://www.cisco.com/go/securityconsulting ). o Merged in a number of Windows fixes/updates from Andy Lutomirski (Luto(a)myrealbox.com) o Merged in fixes/updates (mostly to the Windows functionality) from Matt Hargett (matt(a)use.net) o Applied patch by Colin Phipps (cph(a)netcraft.com) which correctly encodes special characters in the XML output. o Applied patch by William McVey (wam(a)cisco.com) which adds the uptime information printed with -O to the XML output format. o Fixed byte-order bug in Windows packet matching code which caused -PS and -PT to fail. Bug found and patch sent by Tim Adam (tma(a)osa.com.au) o Fixed segfault problem with "-sU -F". Nobody reported this until I noticed it :(. Anytime you see "Segmentation Fault" in the latest version of Nmap, it is probably a bug -- please mail me the command you used, the OS/platform you are running on, and whether it is reproducable. o Added a convenience option "-oA (basefilename)". This tells Nmap to log in ALL the major formats (normal, grepable, and XML). You give a base for the filename, and the output files will be base.nmap, base.gnmap, and base.xml. o Documented the --append_output option which tells Nmap to append scan results to any output files you have specified rather than overwriting the files. o Integrate TIMEVAL_SEC_SUBTRACT() fix by Scott Renfro (scott(a)renfro.org) which improves timing accuracy. Nmap 2.54BETA29 o Integrated William McVey's multi-portlist patch. This allows you to specify different port numbers when scanning both TCP & UDP. For example, if you want to UDP for 53,111 and 137 while TCP scanning for 21-25,80,139,515,6000,8080 you could do: nmap -sSU -p U:53,111,137,T:21-25,80,139,515,6000,8080 target.com . Prior to this patch, you had to either use different Nmap executions or scan both UDP & TCP of each port. See the man page for more usage info. o Added/updated a bunch of fingerprints, including Windows XP release candidates #1 & #2, OpenBSD 2.9, various home gateways/cable modem, MacOS X 10.0.4, Linux 2.4.7, Guantlet Firewall 4.0a, a few Cisco routers, and, most importantly, the Alcatel Advanced Reflexes IP Phone :). Many other fingerprints were updated as well. o Found and fixed some relatively major memory leaks based on reports sent in by H D Moore (hdm(a)secureaustin.com), mugz (mugz(a)x-mafia.org), and Steven Van Acker (deepstar(a)ulyssis.org) o Applied patch from Chad Loder (chad_loder(a)rapid7.com) which improves random target host selection (-iR) by excluding more undesirable addresses. o Fixed portscan timing bug found by H D Moore (hdm(a)secureaustin.com). This bug can occur when you specify a --max_rtt_timeout but not --initial_rtt_timeout and then scan certain firewalled hosts. o Fixed port number printing bug found by "Stephen Leavitt" (stephen_j_leavitt(a)hotmail.com) o The Nmap source tarball now extracts with more lenient permissions (sometimes world-readable or world-executable, but never world-writable). If you don't want this, set your umask to 077 (which is what I do). Suggested by Line Printer (lps(a)rahul.net) Nmap 2.54BETA28 o I hope that I have fixed the Libpcap "Unknown datalink type" problem that many people reported. If you still receive this error, please send me the following info: 1) Full output of Nmap including the command you typed 2) What OS/OS version you are using 3) What type of interface is the scan going through (PPP, ISDN, ethernet, PPPoE, etc) 4) Whether you compiled from source or used the RPM version o Hopefully fixed Libpcap lex/yacc generated file problem that plagued a few folks. o Various minor fixes/changes/updates Nmap 2.54BETA27 o Fixed bug that caused "adding open port" messages to be printed even when verbose mode was not specified. (patch sent by Doug Hoyte ( dugely(a)yahoo.com ). o Fixed bug in zombie:port option parsing in Idlescan as well a few other bugs in patch sent by Germano Caronni (gec(a)acm.org) o Fixed Windows compilation (I broke it when I added Idlescan). o Fixed a (Win32 only) port identification bug which would cause some ports to be listed as "unknown" even when Nmap should know their name. This was found at patched by David Griffiths (davidg(a)intrinsica.co.uk). o Fixed more nmap-os-fingerprints syntax/grammar violations found by Raymond Mercier of VIGILANTe o Fixed a memory leak in Nbase str*casecmp() functions by applying patch sent by Matt (matt(a)use.net). I plan to kill this whole strcasecmp.c file as soon as possible (it is a mess). Nmap 2.54BETA26 o Added Idlescan (IPID blind scan). The usage syntax is "-sI [zombie]". o Fixed a bunch of fingerprints that were corrupt due to violations of the fingerprint syntax/grammar (problems were found by Raymond Mercier of VIGILANTe ) o Fixed command-line option parsing bug found by "m r rao" (mrrao(a)del3.vsnl.net.in ) o Fixed an OS fingerprinting bug that caused many extra packets to be sent if you request a lot of decoys. o Added some debug code to help diagnose the "Unknown datalink type" error. If Nmap is giving you this error, please send the following info to fyodor@insecure.org : 1) The full output from Nmap (including the command arguments) 2) What OS and OS version are you using 3) What type of adaptor are you using (modem, ethernet, FDDI, etc) o Added a bunch of IDS sensor/console/agent port numbers from Patrick Mueller (pmueller(a)neohapsis.com) Nmap 2.54BETA25 o Added a whole bunch of new OS fingerprints (and adjustments) ranging from big important ones (Linux 2.4.X, OpenBSD 2.9, FreeBSD 4.3, Cisco 12.2.1, MacOS X, etc) to some that are more obscure ( such as Apple Color LaserWriter 12/660 PS and VirtualAccess LinxpeedPro 120 ) o Upgraded Libpcap to the latest version (0.6.2) from tcpdump.org. I modified the build system slightly by shipping pre-generated scanner.c/grammer.c (instead of using lex/yacc) and I also upgraded to the newest config.sub/config.guess . o Fixed some issues with the new Libpcap under Linux (patches will be sent to the developers). o Added "All zeros" IP.ID sequence classification to account for the new Linux 2.4 scheme which seems to use 0 whenever the DF bit is set (probably a good idea). o Tweaked TCP Timestamp and IP.ID sequence classification algorithms Nmap 2.54BETA24 o Fixed compilation problems on MacOS X publis release. Thanks to Nicolas Dawson (nizcolas(a)myrealbox.com) for securing an account for me. o On the suggestion of the ever-helpful LaMont Jones (lamont(a)hp.com), I obtained the newest config.guess/config.sub from http://subversions.gnu.org/cgi-bin/cvsweb/config and made libpcap/nbase use symlinks rather than copeis of the file o Applied patch from LaMont Jones (lamont(a)hp.com) which makes Nmap compatable with gcc 3.0 (apparently printf() is a macro in that version) o Applied patch from Colin Phipps (cph(a)netcraft.com) which fixes a problem that kept UDP RPC scanning from working unless you were also doing a TCP scan. o Applied a patch from Chris Eagle (cseagle(a)redshift.com) which fixes Windows compilation (I broke it with a recent change). o Updated Lithuanian translation of man page based on a newer version sent by Aurimas Mikalauskas (inner(a)crazy.lt) o Killed carriage returns in nmap.c and nmapfe.c, which caused problems for some (SGI) compilers. Problem noted by Artur Niederstebruch (artur(a)sgi.com) o Updated to latest version of rpc program number list, maintained by Eilon Gishri (eilon(a)aristo.tau.ac.il) o Fixed a quoting bug in the Nmap man page found by Rasmus Andersson (rasmus(a)pole-position.org) o Applied RPM spec file changes from "Benjamin Reed" (ranger(a)befunk.com) which allows you to avoid building the frontend by adding "--define frontend 0" to the build command (eg --rebuild, --ba, etc). Nmap 2.54BETA22 o Eliminated usage of u_int32_t (was causing compilation errors on some Sun and HP boxes). Problem first noted by Nick Munger (nmunger(a)Oswego.EDU) and Ralf Hildebrandt (Ralf.Hildebrandt(a)innominate.com) and Antonin Sprinzl (Antonin.Sprinzl(a)tuwien.ac.at) o Defined integer-width typedefs such as u32/s32/u16/etc. in Nbase. Went through much of the Nmap code and substituted these in where correct lengths are important (port numbers, IP addresses, etc). Nmap 2.54BETA21 o Cleaned up a few build/distribution issues that were reported by LaMont Jones (lamont(a)hp.com) o Fixed compiler warning noted by Gabor Z. Papp (gzp(a)papp.hu) ) Nmap 2.54BETA20 o Added TCP Timestamp sequence checking for OS detection and Netcraft-style uptime tests. o Found and fixed (I hope) byte alignment problem which was causing bus errors on SPARC64 ( reported by H D Moore (hdm(a)secureaustin.com) and Matthew Franz (mfranz(a)cisco.com) ) o Apple Darwin (Mac OS X) 1.2 portability patch from Rob Braun (bbraun(a)synack.net) o Added IPID sequence number predictability report (also now used in OS detection). o Show actual IPID, TCP ISN, and TCP timestamp values in XML format output rather than just the cooked results. o Suppress IPID and TCP ISN predictability report unless you use -v (you need -O as well). o Applied Solaris 8 compilation fixes from Germano Caronni ( gec(a)acm.org ) o Applied configure.in variable name typo fixes from Christian Weisgerber (naddy(a)openbsd.org) o Applied some more changes from Andy Lutomirski (Luto(a)mailandnews.com) which provides better detection and reporting from some heinous errors. o Added -n and -R (always/never DNS resolve) options to the man page. Nmap 2.54BETA19 o I ported NmapFE to Windows so that Win32 users can use the graphical interface. It generally works, although I haven't tested much. Patches welcome! o Various little fixes and cleanups, especially to the Windows port. o Applied patch from Andy Lutomirski (Luto(a)mailandnews.com) which enhances some of the Win* error messages and adds the --win_trace debugging option. o Applied some patches from Jay Freeman (saurik(a)saurik.com) o New --data_length option adds indicated number of random data bytes to send with scan packet and tcp ping packet (does not currently work with ICMP ping packet). Does not affect OS detection, RPC, or connect() scan packets. o Windows portability fixes o Various other little fixes. o Renamed rpc.h and error.h because they conflict with Windows include files. By the way, this was a pain to figure out because VC++ is such a crappy compiler! It basically just says problem in "foobar.h" without giving you any idea how foobar.h got included! gcc gives you a nice message tracing the chain of include files! Nmap 2.54BETA16 o Upgraded to latest version of Winpcap ( 2.1-beta ) o Merged in Windows port code from Ryan Permeh ( ryan(a)eeye.com) and Andy Lutomirski ( Luto(a)mailandnews.com ). o Took out C++ compiler test from nbase configure script. It was inserted accidently, but I found it interesting that only 2 people complained about this causing them problems. I guess most everyone already has C++ compilers. o Applied patch from Steve Bleazard (steve(a)bleazard.com) which fixed bug in internal Smoothed Round Trim Time calculations. o Fixed CFLAGS computation error in configure. Problem discovered and patched by Fredrik Lundholm (exce7(a)ce.chalmers.se) o Added more debugging code for "Unknown datalink type" error -- if you get this, please send me the full error msg including hex values. o Added Portuguese man page translations from Antonio Pires de Castro Junior (apcastro(a)ic.unicamp.br). o Capitalized all references to God in error messages. Nmap 2.54BETA7 o Applied patch from Hubert Feyrer (hubert.feyrer(a)informatik.fh-regensburg.de) which adds support for the new NetBSD DLT_PPP_* types. o Updated to Eilon Gishri's (eilon(a)aristo.tau.ac.il) newest version of nmap-rpc at ftp://ftp.tau.ac.il/pub/users/eilon/rpc/rpc o Moved a bunch of the scanning engine related functions to new files (scan_engine.c and scan_engine.h ). Timing functions were moved to the new timing.c/timing.h . Other stuff was shifted to tcpip.c/tcpip.h. At some point, nmap.c will only contain the Nmap command line UI. o Updated Russian version of man page from Alex Volkov (topcat(a)nm.ru) Nmap 2.54BETA6 o Added XML output (-oX). Hopefully this will help those of you writing Nmap front ends and other tools that utilize Nmap. The "machine-readable" output has been renamed "grepable" (-oG) to emphasize that XML is now the preferred machine-readable output format. But don't worry if your tool uses -oM , that format (and the deprecated -oM flag) won't go away any time soon (if ever). o Applied patch from Stefan Rapp (s.rapp(a)hrz.uni-dortmund.de) which fixes a variable argument integer promotion problem in the new snprintf compatability file. This is important for Redhat 7 systems. o Reorganized output-related routines so that they now reside in output.c & output.h. Let me know if I accidently screwed up the behavior of any scan types in the process. Nmap 2.54BETA5 o Revamped the 'compatability libraries' subsystem. Moved all of that to a new library called 'libnbase' and changed Nmap and NmapFE to use that. I included a better version of *snprintf and some other compatability files. Obviously I cannot test these changes on every whacked OS that needs this compatability cruft, so please let me know if you run into compilation problems. o Fixed a problem found by Martyn Tovey (martyn(a)netcraft.com) when using Nmap on platforms that dislike division by zero. o Removed 128.210.*.* addresses from Nmap man page due to complaints from Purdue security staff. o Fixed FreeBSD (some versions) compilation problem found by Martyn Tovey (martyn(a)netcraft.com) Nmap 2.54BETA4 o Upgraded to the very latest Libpcap version ( the 9/3/00 CVS snapshot ). This version is from the tcpdump.org group rather than the Lawrence Livermore crew. The most important advantage is Linux Socket Filter support (so you won't have that annoying syslog message about Nmap using the obsolete SOCK_PACKET interface). o I tried to install Nmap on yet another machine without lex/yacc or flex/bison. That was the last straw! I am now shipping the generated C files, which eliminates the lex/yacc requirement. o Applied patch by Jay Freeman (saurik) (saurik(a)saurik.com) to make Nmap C++-clean (this was lot of tedious work! Thanks!). Note that Nmap still uses a normal C compiler by default, but Nmap derivatives may appreciate C++ compatability. Note that this only applies to "Nmap proper", not libpcap. o Added a HACKING file for people who want to help with Nmap development. It describes preferred patch formats, development resources, and offers a number of useful changes that would likely be accepted into the main tree. o Fixed a configure.in error found by Vacuum (vacuum(a)technotronic.com) which could cause compilation errors. o Fingerprint file adjustments for better Win* detection o Ensure libpcap is not configured and/or installed if you already have a "new enough" version (0.4a6+) installed. o Included Italian translation of Nmap man page from Giorgio Zoppi (deneb(a)supereva.it) . o Fixed a SYN scan problem that could cause a major slowdown on some busy networks. o Fixed a crash problem in NmapFE reported by sverre ( sverre(a)gmx.net ) o Added an "SInfo" line to most printed fingerprints. It looks similar to this: SInfo(V=2.54BETA4%P=i686-pc-linux-gnu%D=9/4%Time=9681031%O=7%C=1) and contains information useful when fingerprints are reported (Nmap version/platform, scan date, and open/closed ports used) o Fixed RPCGrind (-sR) scan. It has been almost completely broken since 2.54BETA2 (which has been out for two weeks) and nobody reported it! I noticed the problem myself during testing of something else. I am disappointed that nobody bothered to even let me know that this was broken. Does anyone even use RPC Scan? o Various other small fixes/improvements Nmap 2.54BETA3 o Went through and added/adjusted a bunch of fingerprints. A lot of people submitted Windows Millenium Edition (WinME) beta fingerprints, but nobody submitted IPs for them. So please let me know if this version detects your WinME boxes. o Applied NmapFE patch from Michael Fischer v. Mollard (mfvm(a)gmx.de) which made did the following: o Added delete event so that NmapFE always quits when you kill it with your window manager o added the menubar to the vbox instead to the fixed widget o Various small fixes/improvements Nmap 2.54BETA2 o Added a shortcut which can make single port SYN scans of a network much faster. For example, if a new sendmail vulnerability is found, this reduces the time it takes to scan your whole network for port 25. This shortcut takes effect when you do "-PS[port] -sS -p[port]". For example 'nmap -n -sS -p25 -PS25 24.0.0.0/8". This optimization doubled the scan speed in a 30,000 IP test I performed. o Added -sL (List scan). Just as ping scan (-sP) allows you to short circuit the scan right after pinging, -sL allows you to short circuit the scan right after target selection. This allows you to see what hosts WOULD be scanned without actually doing it. The hosts will be resolved unles you use -n. Primary uses: 1) Get all the IPs in a network (like A.B.C.D/16) and take out machines that are too fragile to be scanned safely before calling Nmap with the new list (using -iL). 2) Test that a complex spec like 128.4,5,7-9.*.7 does what you expect before actual scanning. 3) When all you want to do is resolve a bunch of IPs. 4) You just want results of a zone transfer (if it is implemented). o Added some new fingerprints and adjusted some others based on submissions to the DB (I still have a lot more to go through so don't worry if your submission is still not detected). o Added a warning when you scan 0 hosts (eg "nmap -v"). There are various other output tweaks as well. o Ensured that 0.0.0.0 can be scanned by nmap (although on some OSs, like Linux, it won't work due to what seem to be kernel bugs). Oh well. I'll look into it later. Nmap 2.54BETA1 o Added an extremely cool scan type by Gerhard Rieger ( rieger at iue.tuwien.ac.at ) -- IP Protocol scanning. Basically it sends a bunch of IP headers (no data) with different "protocol" fields to the host. The host then (usually) sends back a protocol unreachable for those that it does not support. By exclusion, nmap can make a list of those that are supported. This is similar in concept to (and is implemented using most of the same scanning routines as) UDP scanning. Note that some hosts do not send back protocol unreachables -- in that case all protocols will appear "open". o Fixed an uninitialized variable problem in NmapFE (found by Alvin Starr (alvin at iplink.net ) o Fixed a packaging problem that lead to the Nmap man page being included twice in the .tgz . o Fixed dangling nroff include in xnmap man page (noted by Debian Nmap package maintainer LaMont Jones (lamont(a)security.hp.com) o Give a warning when no targets at all are specified o Updated 'make uninstall' so that it deletes all relevant files o Included latest nmap-rpc from Eilon Gishri (eilon at aristo.tau.ac.il) o Eliminated -I. from Nmap's and NmapFE's makefiles (suggested by "Jay Freeman (saurik)" (saurik at saurik.com) o Added Russian documentation by Alex Volkov o Added Lithuanian documentation from Aurimas Mikalauskas (inner(a)dammit.lt) Nmap 2.53 o Fixed a commenting issue that could cause trouble for non-GNU compilers (first found by Jan-Frode Myklebust (janfrode at parallab.uib.no)) o A few new services to nmap-services Nmap 2.52 o Added very simple man pages for xnmap/nmapfe (lack of man pages for these was noticed by LaMont Jones (lamont(a)hp.com), the Debian Nmap package maintainer, based on bug report by Adrian Bunk (bunk(a)fs.tum.de ). o Fixed a "Status: Down" machine name output problem in machine parseable logs found by Alek O. Komarnitsky (alek(a)ast.lmco.com) o Took some wierd files out of the doc directory (cd, grep , vi, and .swp) o Fixed some typos found by Thomas Klausner (wiz(a)danbala.ifoer.tuwien.ac.at) o Updated nmap-rpc with new entries found in the latest version of Eilon Gishri's rpc list. Nmap 2.51 o Fixed target parsing bug found by Steve Horsburgh (shorsburgh(a)horsburgh.com). o Changed makefile/rpm to store fingerprint, rpc, and services file in $prefix/share/nmap rather than $prefix/lib/nmap , since these files are architecture independent. You should now use ./configure --datadir instead of ./configure --libdir to change the default location. Suggested by Thomas Klausner (wiz(a)danbala.ifoer.tuwien.ac.at). o I am now including Eilon Gishri's (eilon(a)aristo.tau.ac.il) rpc number list (which he recently merged with the Nmap 2.50 rpc list). o Included Spanish and French HTML versions of the Nmap man page (may not always be up to date). Nmap 2.50 o Fixed an IP calculation error which could occur in some cases where you scan machines on different devices (like lo and eth0). This problem was discoved by Jonathan Fine (jfine(a)psu.edu). o Fixed a problem that could, in rare cases, cause a SYN scan scan to crash (the error message was "attempt to add port number X with illegal state 0"). This problem was reported by Erik Benner (erik(a)xyzzy.net) o Changed the .spec file so that RPM versions create a xnmap link to nmapfe ( the normal make install has done this for a long time ). Nmap 2.3BETA21 o A number of people reported problems with nmapfe in various environments (specifically gdk errors, hangs, and crashes). I think that is now fixed. Let me know if you still have the problem (make sure the title bar says BETA21). o Added a bunch of OS fingerprints based on all the contributions in the last month or so. o Fixed a bug that completely broke RPC scanning in BETA19. o Added list of ports scanned near the top of each machine log WHEN -v was specified. Here is an example of the format: # Ports scanned: TCP(13;1-10,22,25) UDP(0;) The "13" above is the number of TCP ports being scanned. o Got rid of a snprintf() from nmapfe sine some systems don't have it :( and I'm to lazy to integrate in the snprintf that comes with nmap right now. o Fixed important target IP range parsing bug found by Jean-Yves Simon ( lethalwp(a)linuxbe.org ). o Applied patch by albert chin (china at thewrittenword.com) which adds --with-libpcap[=DIR] option to configure and and adds an elegant approach for -lnsl and -lsocket checking to configure . o Fixed a bug which could cause Nmap to mark a port filtered based on ICMP dest. unreachable packets relating to a different host than the one being scanned. o Fixed output problem relating to ident scan noted by Peter Marschall ( peter.marschall at mayn.de ) o Applied patch to services.c by Andrew Brown (atatat(a)atatdot.net) which prevents some useless debugging (-d) output when reading some kindss of /etc/services files. o Added "Host: [machinename] (ip) Status: Down" to machine logs when the verbose option is given (just like down hosts are reported to stdout when verbose is given). Suggested by Alek Komarnitsky. o Applied NetBSD compatability patch provided by Mipam (reinoud at ibbnet.org) which changes an autoconf macro to check for getopt_long_only instead of getopt_long. o Nmap used to print an inaccuracy warning when no open TCP ports were found on the target machine. Due to a bug, this was not always being printed. Problem found by Matt (matt at use.net) and Ajay Gupta2 (Ajay.Gupta2 at ey.com). o Added the number of ports in the ignored state right after the state name in machine parseable logs. It used to looke like: "Ignored State: closed" whereas now it looks like: "Ignored State: closed (1508)" Meaning that 1508 ports were closed and thus are not specifically enumerated. o Changed all nmapfe calls to gdk_font_load into gdk_fontset_load . Bennett Feitell (bfeitell at panix.com) suggested that this fixed some nmapfe font problems. Nmap 2.3BETA20 o Applied patch sent in by s.rapp(a)hrz.uni-dortmund.de which fixes a memory alignment bug in osscan.c which could cause core dumps on machines which require aligned access (like SPARC). o Fixed a compilation problem on machines that do not have MAP_FAILED defined (as a return value to mmap). Problem noted by Phil Stracchino (alaric(a)babcom.com). Nmap 2.3BETA19 o Tweaked the output so that it now tells how many ports are not shown and what state the ignored ports are in. This info could be inferred before by people who had studied the manpage, but now the info is explicitly available. I cleaned up a bunch of stuff internally to make this happen. I hope I didn't break anything! o Changed NmapFE so that it always kills any running Nmap process when you press exit. Problem noted by Marc Renner (mrenner(a)ci.marysville.wa.us) o Apparently some Linux (glibc) systems now come with a "strcasestr" function. So I have made autoconf look for this and use the native version if supported. (problem noted by Sami Farin (sfarin(a)ratol.fi)). o Added a new attribute "Ignored State: xxx" to the machine parseable logs, where xxx is the state (closed, filtered, or UNfiltered) that is being ignored. Ports in that state are not listed (they weren't listed in earlier versions either). Perhaps I should list ALL ports for machine parseable output. Opinions? o Merged in a patch sent in by Mipam (reinoud(a)ibbnet.org) which is apparently part of the OpenBSD Nmap "port". Although Nmap seems to work fine for me on my OpenBSD 2.4 box, a couple OpenBSD users have complained of problems. Hopefully this will help. (it adds DLT_LOOP and DLT_ENC offset cases when reading from libpcap). o A few really minor bugfixes. Nmap 2.3BETA18 o Fixed a very important bug that occurred when SYN scanning localhost. Many thanks to Dries Schellekens ( gwyllion(a)ace.ulyssis.student.kuleuven.ac.be ) for first reporting the problem. o Uros Prestor from TurboLinux informed us that the latest versions of Nmap work with Linux on the upcoming Intel Merced/Itanium IA-64 processors. He also said that the TurboLinux distribution includes Nmap. Kudos to them! As well as the other distros that support Nmap (Debian, Red Hat, Suse, Trinux) and of course FreeBSD, NetBSD, & OpenBSD. Does anyone know if Nmap ships with the latest from Mandrake or Corel? The latest Solaris includes some Free software. If anyone can get them to ship Nmap, I will buy you a case of beer :). o Added a #define to change vsnprintf to vsprintf on machines which do not support the former (mostly Solaris 2.5.1 and earlier). This function is less safe. For people who care about security, we recommend an upgrade to Solaris 8 (or Linux/*BSD). o Changed the NmapFE version to 0.[nmap_version] rather than always leaving it at 0.9.5 (which was confusing). Thanks to J.D.K. Chipps (jdkc(a)woptura.com) for noticing this. o Added support for "-vv" (means the same as "-v -v"). Older versions of Nmap supported it (noted by George Kurtz). Nmap 2.3BETA17 o Added ACK scanning. This scan technique (which van Houser and others have been bugging me to add for years :), is great for testing firewall rulesets. It can NOT find open ports, but it can distinguish between filtered/unfilterd by sending an ACK packet to each port and waiting for a RST to come back. Filtered ports will not send back a RST (or will send ICMP unreachables). This scan type is activated with -sA . o Documented the Window scan (-sW) which Lamont Granquist added in September 99. o Added a whole bunch of OS fingerprints that people have submitted. o "Protocol" field in output eliminated. It is now printed right next to the number (/etc/services style). Like "22/tcp". I wonder what I should put in the extra white space this leaves on the report :). o Added --resume option to continue a large network scan where you left off. This is useful for recovering from errors (modem drops carrier, network outage, etc). It also allows you to start and stop for policy reasons (like if a client only wants you to scan on weekends or at night) or if you want to run the scan on a different host. Usage is 'nmap --resume logfile' where logfile can be either normal (-oN) or machine parseable (-oM) logfile from the scan that was aborted. No other options can be given (the options in the logfile from the original scan will be used). Nmap will start off with the host after the last one successfully scanned in the log file. o Added --append_output option which causes -oN/-oM/-oS to APPEND to the output file you specify rather than overwriting it. o Various internal code cleanup, makefile fixes, etc. o Changed version number from 2.3BETA* to 2.30BETA* to appease various packaging systems that thought 2.3BETA was < 2.12 . o Nmap output to files now correctly flushes output after scanning for each host is finished. o Fixed compiler -L flags error found by Ralf Hildebrandt (R.Hildebrandt(a)tu-bs.de) o Fixed configure scripts so that options you give to the Nmap configure (like --prefix ) are also passed to the nmapfe configure script. This problem was noted by Ralf Hildebrandt (R.Hildebrandt(a)tu-bs.de). While I was at it, I added some other cleanups to the system. o Added --noninteractive option for when nmap is called from scripts (where stuff like prompting users for info is unacceptable). It does not currently do anything (Nmap never prompts) and script writers should probably wait until at least May '2000 so their scripts still work with earlier versions of Nmap. o Updated to the latest config.guess and config.sub from Autoconf 2.13 o Applied patch by Sven (s.carstens(a)gmx.de> which fixes a segmentation fault problem in Nmapfe colored mode as well as some output niceties. o Changed some C++ comments to C-style for portability (noticed by "Sergei V. Rousakov" (sergei(a)cas.Vanderbilt.Edu) ) Nmap 2.3BETA14 o Peter Kosinar (goober(a)gjh.sk) performed some cleanup of the output routines and as a bonus he added skript kiddie output mode!!! Try it out by adding "-oS - " to your nmap command line. Note that using '-' to represent stdout instead of a filename is something you can do with any of the output modes. o Ensured that Nmap always gives up on ident scan after the first port attempt finds it to be closed (problem noticed by Matt (matt(a)use.net)) o Changed strsep's in nmapfe to more portable strtok's (should especially help Nmapfe compiles on Solaris) o Changed permutation algorithm to make port order and host order shuffling more random. o Various minor changes and internal code cleanup. o Fixed integer overflow that was limiting the max --host_timeout value to about 2,000,000 milliseconds (~1/2 hour). The limit is now about 4,000,000,000 milliseconds (~1 month). I really hope you don't need more than that :). Nmap 2.3BETA13 o I made Nmap smarter about detecting filtering during UDP, Xmas, NULL, and FIN scans. o Updated Nmapfe to 0.9.5 (+ a patch from NmapFE author Zach Smith) o Fixed a problem where NmapFE would fail to honor $PATH (Noticed by K. Scott Rowe (kscott(a)nmt.edu) o Added a couple ICMP unreachable messages Nmap was missing (found by Bifrost (bifrost(a)minions.com)). o Internal cleanup that improves the way some port lists are stored. o Added some more RPC numbers from (mmmorris(a)netscape.net) o Relaxed the dependency requirements of nmapfe rpm (now will accept any version of Nmap). Nmap 2.3BETA12 o Added interactive mode which adds convenience for managing nmap sessions and also enhances privacy. Get to it with --interactive and then type 'h' for help. o Added/modified many fingerprints including the latest 2.3.X Linux releases, the latest Win2000 builds, the Apple Airport Wireless device, and several dozen more. o Migrated to RPM .spec file sent in by Tim Powers (timp(a)redhat.com). That is the file they will be using to package Nmap with the power tools CD in the next Redhat release. The most important changes are that Nmap (only the RPM version) now installs in /usr/* instead of /usr/local/* and the frontend is now dynamically linked with GTK and comes in a separate rpm. o The -i (input from list) option has been deprecated. From now on you should use -iL [filename] to read from a list or -iR to have Nmap generate random IPs to scan. This -iR option is new. o The -o and -m options have been deprecated. From now on, you should use -oN for normal (human readable) output and -oM for machine parseable output. At some point I might add -oH (HTML output) or -oSK (sKr|pt kiDdi3 0uTPut). o Added --randomize_hosts option, which causes hosts be be scanned in non-sequential order. This makes scans less conspicuous. For efficiency reasons, the hosts are chopped into groups of 2048 and then each group is internally shuffled (the groups still go in order). o Rearranged the help ('nmap -h' or 'nmap' or 'nmap --help') screen to be shorter (37 -> 23 lines!) and include some of the new features of this release. The man page was updated as well. o Fixed longstanding bug where nmap -sS mylocalnetwork/24 would not successfully scan the host running nmap. o Internal improvements to make scanning faster with -i (input list) or when you specify multiple machines on the command line. o Uses faster GCD algorithm and fixed several typos (sent in by Peter Kosinar). o Provide more information in machine/human readable output files (start time, end time, RPC program name, Nmap version number) o Killed the -A option (if you don't know what that is then you won't miss it. In fact, even if you do know what it is you won't miss it.) Nmap 2.3BETA10 o Added about 70 new OS fingerprints so that Nmap can detect more systems. The most important new fingerprints are probably: * The new SP5+ NT boxes -- After all these years MS FINALLY made sequence prediction harder (on NT anyway). * Solaris 8 Pre-Release * Sega Dreamcast (Hack that!) * Latest Windows 2000 builds * OpenBSD 2.6 Nmap 2.3BETA9 o Applied patch by Mark Abene (Phiber Optik) to fix several type length issues so that it works on Linux/Alpha. o Applied patch by Matthieu Verbert (mve(a)zurich.ibm.com) to speed up OSScan Nmap 2.3Beta8 o Added "firewall mode" timing optimizations which can decrease the ammount of time neccessary to SYN or connect scan some heavily filtered hosts. o Added min_rtt_timeout timing option (see man page for details) o Changed "TCP Ping" to use a random ACK value rather than 0 (an IDS called Snort was using this to detect Nmap TCP Pings). o Some changes for better Alpha/Linux support based on investigation by Bill Beers (wbeers(a)carolina.rr.com) o Applied changes for FDDI support by Tobias J. Nijweide (tobias(a)mesa.nl) o Applied a socket binding patch from LaMont Jones (lamont(a)security.hp.com) which can be useful when using -S to specify one of multiple interfaces on a machine. o Made OS detection smart enough to first check scan results for a known closed port instead of immediately resorting to a random one. This improves OS detection against some machines behind packet filters. (suggested by van Hauser) o Applied a shortcut suggestion by Thomas Reinke which can lead to a tremendous speedup against some firewalled hosts. o Added some ports commonly used for RPC to nmap-services o Fixed a problem with the timing of an RPC scan (could come before the UDP scans they rely on) o Added a number of new ports to nmap-services Nmap 2.3Beta6 o Added sophisticated timing controls to give the user much more control over Nmap's speed. This allows you to make Nmap much more aggressive to scan hosts faster, or you can make Nmap more "polite" -- slower but less likely to wreak havoc on your Network. You can even enforce large delays between sending packets to sneak under IDS thresholds and prevent detection. See the new "Timing Options" section of the Nmap man page for more information on using this. o Applied Lamont Granquist's (lamontg(a)u.washington.edu) Window scan patch (I changed the name from ACK scan to Window scan since I may add another scan that uses ACK packets and I don't want them to be confused). -sW activates this scan type. It is mostly effective against BSD, AIX, Digital UNIX, and various older HP/UX, SunOS, and VAX. (See nmap-hackers mailing list archives for an extensive list). o Added various long options people expect to see like --version , --help , --usage , etc. Some of the new timing options are also long. I had to add getopt_long C files since most non-Linux boxes don't support getopt_long in libc. o Human readable (-o) output changed to include the time/date of the scan. Suggested by van Hauser. Nmap 2.3-Beta5 o Changed RPC output based on suggestions by David O'Brien (obrien(a)NUXI.com) and Lance Spitzner (lance(a)spitzner.net). I got rid of the "(Non-RPC)" unnecessary clutter which appeared after each non RPC port and the "(untested)" that appeard after each "filtered" port. o Added a ton of new OS fingerprints people submitted. I had about 400 in my inbox. Of course, almost 100 of them were submissions for www.windows2000test.com :). o Changed the machine parseable output of RPC information to include the version information. If we figured out the RPC info, it is now provided as "program-num*lowversion-highversion". If we didn't get the number, but we think the port is RPC, the field simply contains "R". If we believe the port is NOT RPC, then the field contains "N". If the field is empty, we did not RPC scan the port. Thanks to H D Moore (nlog(a)ings.com) for making me aware how much the earlier machine parseable RPC logging sucked :). Nmap 2.3-Beta4 o Added direct (non-portmapper) RPC scanning to determine what RPC program is listening on a particular port. This works for UDP and TCP ports and is currently implemented using sockets (which means you can't use decoys, but on the other hand you don't have to be root). Thanks go to ga (ga(a)capyork.com) for writing sample code to demonstrate the technique. The RPC services list included with nmap was compiled by Vik Bajaj (vbajaj(a)sas.upenn.edu) with help from various members of the nmap-hackers list. o Fixed a problem that could cause freezes when you scan machines on at least two different types of interfaces as part of the same command. o Identified and found workaround for Linux kernel bug which allows connect() to sometimes succeed inapropriately when scanning closed ports on localhost. o Fixed problems relating to people who specify the same port more than once on the command line. While the right answer is "well, don't do that!", I decided to fix nmap to handle this gracefully. o Tweaked UDP scanning to be more effective against Solaris ICMP error limiting. o Fixed strtol() integer overflow problem found by Renaud Deraison (deraison(a)cvs.nessus.org) o The HTML translation of the Man page at http://www.insecure.org/nmap/nmap_manpage.html should now be complete (man2html was dropping lines before). o Added a note in the man page that Nmap 2.0+ is believed to be COMPLETELY Y2K COMPLIANT! I've been getting a lot of letters from laywers about that recently. You should still be able to port scan on Jan 1st (well ... as long as you have electricity and gangs of looting thugs haven't stolen your computers :) Nmap 2.2-Beta4 o Integrated nmapfe code from Zach Smith to allow the nmapfe output window to resize when you resize the nmapfe window. o Integrated patch sent in by Stefan Erben (stefan(a)erben.com) which allows nmap to recognize and ignore null interfaces. If you were getting a bogus error like "eth0 not found in /proc/net/route" then this should solve your problem. o Applied patch from Alexander Savelyev (fano(a)ham.kiev.ua) which gives nmap the parameters necessary to support SLIP and PPP on BSDI systems. o Upgraded to a new version of shtool (1.2.3) Nmap 2.2-Beta3 o Adopted Ralf S. Engelschall's excellent shtool script for simplifying the nmap makefile and making it more portable o Various other minor changes to nmapfe. Nmap 2.2-Beta2 o Cleaned up build environment more, fixed up RPM and Makefile.in, eliminated the automake stuff. o Added nmapfe feature to show nmap command as you change options o Changed nmapfe to use a global MyWidgets struct rather than tons of global vars all over the place. o Made nmapfe much smarter about rejecting stupid option attempts. It now tries to correct things when you specify illegal options. o GTK+ 1.0 compatibility fixes o Integrated nmapfe changes from Zach Nmap 2.2-BETA1 o Integrated in nmapfe -- a cool front end wrottem by Zach Smith (matrxweb(a)hotmail.com) Nmap 2.12 o Changed the way tcp connect() scan determines the results of a connect() call. Hopefully this will make nmap a little more portable. o Got rid of the security warning message for people who are missing /dev/random and /dev/urandom due to complaints about the warning. This only silences the warnings -- it still uses relatively weak random number generation under Solaris and other systems that lack this functionality. o Eliminated pow() calls on Linux boxes. I think some sort of glibc bug was causing nmap to sigsegv in some cases inside of pow(). Most people weren't affected, but those who were would almost always SIGSEGV with -O. o Fixed an rpm problem noted by Mark Smith (marks(a)senet.com.au) Nmap 2.11 o Many new fingerprints added. I received more than 300 submissions between this release and the last one. o Fixed IRIX problems which prevented OS scanning from working on that platform. The problem was researched and solution found by Lamont Granquist (lamontg(a)u.washington.edu). You can also thank him for porting nmap to almost every UNIX around. o Added support for '-m -' to redirect machine readable logs to stdout for shell pipelining, etc. I also changed machine readable output to show service names now that we use a nmap specific services file rather than /etc/services. These features were suggested by Dan Farmer. You can also thank him for SATAN (the auditing tool). o Fixed a link-list bug that could cause hangs in UDP,FIN,NULL, and XMAS scans. Also fixed a ptr problem that could cause SIGSEGV. These problem were discovered and tracked down by Ben Laurie (ben(a)algroup.co.uk). You can also thank him for Apache, OpenSSL, and Apache-SSL. o Fixed installation problem for people without a /usr/local/man/man1 directory. Found by Jeffrey Robertson (a-jeffro(a)microsoft.com). I guess you can thank him for Win98 ;). o Several other little fixes to the installation script and minor scanner tweaks. Nmap 2.10 o Private test release Nmap 2.09 o Private test release Nmap 2.08 o Bugfix for problem that can cause nmap to appear to "freeze up" for long periods of time when run on some busy networks. (found by Lamont Granquist) Nmap 2.07 o Fixed a lockup on Solaris (and perhaps other proprietary UNIX systems) caused by a lack of /dev/random & /dev/urandom and a rand() that only returns values up to 65535. Users of Free operating systems like Linux, FreeBSD, or OpenBSD probably shouldn't bother upgrading. Nmap 2.06 o Fixed compile problems on machines which lack snprintf() (found by Ken Williams (jkwilli2(a)unity.ncsu.edu)) o Added the squid proxy to nmap-services (suggested by Holger Heimann) o Fixed a problem where the new memory allocation system was handing out misaligned pointers. o Fixed another memory allocation bug which probably doesn't cause any real-life problems. o Made nmap look in more places for nmap-os-fingerprints Nmap 2.05 o Tons of new fingerprints. The number has grown by more than 25%. In particular, Charles M. Hannum (root(a)ihack.net) fixed several problems with NetBSD that made it easy to fingerprint and he sent me a huge new batch of fingerprints for various NetBSD releases down to 1.2. Other people sent NetBSD fingerprints down to 1.0. I finally got some early Linux fingerprints in (down to 1.09). o Nmap now comes with its own nmap-services which I created by merging the /etc/services from a bunch of OS' and then adding Netbus, Back Orifice, etc. o Random number generation now takes advantage of the /dev/urandom or /dev/random that most Free operating systems offer. o Increased the maximum number of OS guesses nmap will make, told nmap never to give you two matches where the OS names are byte-to-byte equivalent. Fixed nmap to differentiate between "no OS matches found" and "too many OS matches to list". o Fixed an information leak in the packet TTL values (found by HD Moore (hdmoore(a)usa.net)) o Fixed the problem noted by Savva Uspensky about offsets used for various operating systems' PPP/SLIP headers. Due to lack of responses regarding other operating systems, I have made assumptions about what works for BSDI, NetBSD, and SOLARIS. If this version no longer works on your modem, please let me know (and tell me whether you are using SLIP/PPP and what OS you are running). o Machine parseable logs are now more machine parseable (I now use a tab to seperate test result fields rather than the more ambiguous spaces. This may break a few things which rely on the old format. Sorry. They should be easy to fix. o Added my nmap-fingerprintinting-article.txt to the distribution in the docs directory. o Fixed problem where nmap -sS (my_ethernet_or_ppp_ip_address) would not correctly scan localhost (due to the kernel rerouting the traffic through localhost). Nmap should now detect and work around this behavior. o Applied patch sent to my by Bill Fenner (fenner(a)parc.xerox.com) which fixes various SunOS compatibility problems. o Changed the makefile 'all' target to use install-sh rather than mkdir -p (doesn't work on some systems) o Documentation updated and clarified slightly. o Added this CHANGELOG file to the distribution.